[UG2]

Hi everyone, im looking to get some custom milling done to my Geo3, anyone know if this will cause any problems? if it wont then who knows a good design to do?

[Manny2]

What is it that you want to do?
It all depends where your going to do it and how deep.

[ElPanda]

Theres not alot of material left on most newer guns, any milling that you get done would likely be minimal

Assuming you could find someone willing to design a pattern for you, design fixturing, and perform the operations for you its probably going to be a hassle. But in the end its about what you want

[UG2]

I dont know what i want EXACTLY but,, i would like it to get a more Luxe shape but that isnt possible obviously so just something close, so take off as much as possible and make it lighter and curvy? Possible?

["T-MAC"]

unpossible

[UG2]

What could i do to the Geo then?

[Jedihippie]

Originally Posted by UG2

What could i do to the Geo then?

enjoy it

[rexisme]

Originally Posted by UG2

What could i do to the Geo then?

if you want it shaped like luxe..... sell it and buy a luxe...

[Jedihippie]

if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...

disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals

[UG2]

Originally Posted by Jedihippie

if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...

disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals

Hahaah always read the disclaimers! lol

[UG2]

Originally Posted by rexisme

if you want it shaped like luxe..... sell it and buy a luxe...

Not exactly like a luxe, just more curved! ?

[keoni-svx]

Like stated before theres not enough material ledt to really work with. at most you might be able to mill down some edges, rounding them off. But thats probably it.

[UG2]

Ahh ok

[Element Paintball]

cover it in bondo then sculpt it! or just sell it to me really cheap.

[Shootingropes]

Get a file and have some fun. Then sand it down, close to a polish finish, and send it to an anno shop.

[BELOWZERO]

leave it and shoot it ? the geo3 design is great and the milling looks great. More milling patterns on the way cough cough

[Winnipeg_baller]

geo 3 are great why change it? if its not broken don't fix it

[IVIonster]

Originally Posted by Jedihippie

if you send me a geo and a luxe plus a little bit of cash I will machine the innerds of the luxe to accept the innerds from the geo so you can have a geo in a luxe body...

disclaimer: you minght notice that your geo-luxe performs more like a luxe and nothing like a geo. this is normal. also you will notice that the geo mechanism inside the luxe has been skillfully modified to look exactly like luxe internals

[Sombrero]

If I were you, I would keep it the way it is in risk of messing it up. The milling on the geo already looks great

[martin028]

Get a good set of calipers and a copy of a 3D design program like Solidworks and recreate the body of the geo on your program. Then you can do designs that can be milled out and send the file to a cad/cam program and mill it. Thats what I'd do.

[UG2]

Thanks guys but i decided to gold plate the marker hahaha