[neal6]

so im looking for some idas to do to my prostock. right not its half blocked, soon to be microed. im looking for a good spring kit, have my eye on a maddman rocket valve, what are some good qev's? have an e1 trigger, jackhammer 2 lpr and sto ram.

also lookin to do a crazy feedneck mod, cut the feedneck down too far to do the ego mod, so im just gonna rip it out and put a new one in, sumthin way unique on a cocker like an angel lcd feedneck, or an automag(if it will fit)

[Dk-79]

Good luck.

[tacxplosion]

Don't bother with the midget mod unless you have an MQ valve it'll be a ***** to tune, maddman valve isn't really worth the trouble, get an AKA tornado valve if you want an upgrade, a QEV is a QEV is a QEV (except for SP and Belsales swivel QEV's which are an added convenience). Try getting a delrin trigger off of custom 'cockers bst for the e1 frame, the stock one is heavy/bouncy.

Feedneck mod:
http://www.paintballforum.com/autoco...-feedneck.html

[neal6]

Originally Posted by tacxplosion

Don't bother with the midget mod unless you have an MQ valve it'll be a ***** to tune, maddman valve isn't really worth the trouble, get an AKA tornado valve if you want an upgrade, a QEV is a QEV is a QEV (except for SP and Belsales swivel QEV's which are an added convenience). Try getting a delrin trigger off of custom 'cockers bst for the e1 frame, the stock one is heavy/bouncy.

Feedneck mod:
http://www.paintballforum.com/autoco...-feedneck.html

oh, i was only going to cut the front of the bottom tube, i alreadydecided to not cut the bottom back tube(i heard the hammer wont have the needed time to accelerate) i believe thats the mini mod, if i remember right.
how exactly do i remove the stock E1 trigger?

[tacxplosion]

You'll need to take the frame off and loosen 2 set-screws (1 holds the pin, the other, the trigger itself), it comes out downward after that.