Originally Posted by nerdcore
Why would it be set to such low psi? Ions can't run at 60 psi without some extremely modded setup. If you're turning the reg down before airing up each time, you don't really need to do that, or you don't need to turn it down below 100 psi ever.
But you might be right, the 360 probably doesn't give a crap about psi below 100.
Yeah, but I'm guessing (after weeks of tinkering) the bolt is sticking forward when I first air it up because when I first air it up the pressure in the gun is way less than the normal operating pressure. And no, I don't turn my reg down before airing it up
Have you ever had this problem with a QEV and stock bolt?