[IBleed Arbor]

Just broke down my geo after it's first day of play, put it all back together and there is a severe leak coming from the top of the grip frame where it meets the top of the reg as well as out of the back of the eye covers. I'm figuring it's the solenoid but I need some advice because I can't narrow it down. Any help is greatly appreciated.

[DpG3upped]

if you removed the solenoid make sure all ofthe gaskets seated correctly or check if one tore or check if the small screen in there is blocked (happend on my old 2.1)

[littleman-paintball]

hah! thats what u get for not letting me have that embers.... anyways i cant believe u broke it already..

[dznuts007]

Get a solution of soapy water. Dab a small amount on the part where the reg meets the frame. If you see bubbles coming out of there, try changing the oring where the reg meets the frame. Either use the same size or try a bigger size

[MeÐiCX]

Did you remove the solenoid? There are (3) gaskets involved - top & bottom manifold gaskets and the main solenoid gasket. Make sure they are all in place. Refer to page 14 in the manual.

http://files.planeteclipseb2b.com/ma...-MANUAL-EN.pdf

[IBleed Arbor]

Originally Posted by MeÐiCX

Did you remove the solenoid? There are (3) gaskets involved - top & bottom manifold gaskets and the main solenoid gasket. Make sure they are all in place. Refer to page 14 in the manual.

http://files.planeteclipseb2b.com/ma...-MANUAL-EN.pdf

Looks like it's this, appreciate it

[MeÐiCX]

Originally Posted by IBleed Arbor

Looks like it's this, appreciate it