SOLD, Still Have Frame if anyone wants it
This is my pride and joy marker, my one that I said id never sell until I had to
Well seeing as how its been sitting in my gearbag for the last year or so,, I think its only fair that it go to a home where it will be used occasionally
One of ten ever made, one of only 2 ever known to be “in the wild” Team Dark Matter Viking
Heres a rundown of everything for sale here
dark matter Viking with Cut bolt, no stock javelin, AKA bag STD LPR, AKA miteymax, tadao Ebisu board with dyed cover, gen 1 2liter with a short extender, stck valve, pin, and hammer, hammer cartridge has about 2000 cycles on it.. THAT’S IT. Acid Customs AKA trigger #1, from the very first run that he did, made out aluminum, before he switched to carbon fiber, current feedneck is a BP no-rise grips are system X (I have big hands, I like them) CCM reverse rail and ASA, little known fact, Darkmatter was sponsored by CCM, so they had all the parts CCM could provide (all 3 of them) the bottom line has a few character marks, but big deal
the finish on the gun is not perfect, but you can count the number of marks on the anno with one hand, and they are small marks, easily overlooked
now, as for what comes extra
DM5 UL frame modified to mount to a Viking/excel, I went with a more nonstandard “trigger guard up against the reg” configuration, it almost mounts flush, save for alike a millimeter of overhang in the back, but I also had no intention of permanently modifying anything besides the frame.. can also be used on a regular DM4/5/C by removing the filler in the rear hole, also comes with the adapters, in this setup, the UL frame powers the gun, I have both noid and eye adapters, and a pair of DM5 laser eyes, yes its missing its grips, if that’s a deal breaker, ill go buy you some
A robtown valve and hammer pre-built, meaning i have 2 cartridges, and one now holds the RT hammer, a Warped Airsmithing Aluminum bolt pin, an extra stock bolt pin, and the original hammer and ram (there is some marring on the brass part, but i have smoothed out anything that would actually affect a seal. The O-ring makes the seal, the brass just holds the o-ring and provides stability, if you needed to use it, I guarantee you it would work
The original LPC cap, and the original (thin) piston that came in my SCM (I don’t like to throw things out, and you never know when you might need something.. sue me)
An SCM 3 (its got the most updated internals, to include a thick piston (the thin ones were known to get stuck)
Several triggers, a JMJ sling blade, a JMJ Darkworks Blade, the stock blade trigger (stuck screw included free of charge) and an acid customs “wavy” trigger (I think it’s the only one he has ever made)
A tool kit that includes an 03 spanner, a “Viking rebuild kit” of o-rings, and several assorted o-rings, the black ones in plastic are for the ram, they are quad and regular, theres also an extra ball bearing for the bolt pin detent, a couple of the $1 a piece o-rings that aka likes to use to assemble their guns
A Quad detent kit, its missing a spring, because I had to use it on a gun that was getting crazt rollback issues, I was planning on getting this gun milled for quads, but I just never got around to it. The kit was so I had the parts when the time came
And finally feednecks.. it comes with the original CCM no-rise that it had when I got it, and an A+ one without the locking ring (the CCM can get swapped between the two) this is as close to a no-pro as you will ever get with a Viking
My MAIN RULE is, I will not PM you my lowest price. My asking price is there, in black and white, PMing me asking me how low I will go is making me counter offer myself. I’m not going to do it. If you can’t figure out a counter offer on your own, then I’m not going to sell it to you.
im looking For $1200, but am always willing to hear what you have to say
i am leaving the sport, so the only trades i will be looking for are ones that can be flipped easily
Tracker
