[fearsnear]

Thank you for this thread!!!!! hate my 04 prostock feedneck lol

[Rebel_816]

Originally Posted by fearsnear

Thank you for this thread!!!!! hate my 04 prostock feedneck lol

if your lucky you might have one of the later-made 04's with a removeable feedneck. if it is youll be able to see a little ridge on the bottom of it and it will unscrew with some effort.

[fearsnear]

hey thanks for the post, ill try that tonight!

[neal6]

so milling down my feedneck, i was going a little too fast and broke the feedneck free! is there a different feedneck i can put in? like posibly a threaded one?
like maybe an angel one??

[tacxplosion]

http://www.paintballforum.com/autoco...-feedneck.html

[neal6]

Sweet thanks a lot cheaper throb buying a $100 tap to tap an angel feedneck

[hmcl281]

http://paintballgateway.com/wgpauthvefep.html

simple way of installing one if you have a big enough vise is just to clamp it down and turn the handle till the vise close at the right stop. install your bolt into the body as a guide so you know where to stop. your basically using the vise to press it in.

[neal6]

Originally Posted by hmcl281

http://paintballgateway.com/wgpauthvefep.html

simple way of installing one if you have a big enough vise is just to clamp it down and turn the handle till the vise close at the right stop. install your bolt into the body as a guide so you know where to stop. your basically using the vise to press it in.

sounds awesome. i think my vise is probably big enough
im just looking to make a sweet custom cocker, any other ideas on weird, random and cool feednecks i could put?