Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 10-04-2012, 01:59 PM #1
Avratech Tech
russc's Avatar
Join Date: Apr 2008
Location: Vancouver, BC
russc posts videos on PbNation
russc has achieved Level 1 in PbNation Pursuit
progress on my MCB buildoff pump shoebox

Got a bunch of work finished tonight, thanks to adam45 for hosting.

The air passages are tapped for cocker barbs, the bolt and dump chamber valve now have manual control out the back. I'll still need to make some kind of oringed assembly to keep the dump chamber valve sealed while the cocking rod goes out the back, but that should be simple. Had to turn down an Automag ASA so that the pump rod can clear it.

LPR will go to a pneumatic trigger which will directly open the valve. There will be a backblock that will be attached to the bolt and cock the cocking rod and open the dump chamber to allow it to fill. :gunsfiring:

Here's my original concept video on YouTube if you didn't see it.

Ordering for the summer run of Avratech Retro 7s is open! Made in Canada and anodized to order by the TonSixers.
russc is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 10-17-2012, 11:47 AM #2
Blind Aggression
NaftySquared's Avatar
Join Date: May 2005
Location: Cincinnati, OH
Annual Supporting Member
 has been a member for 10 years
NaftySquared plays in the PSP
Very cool, lots of hard work ahead it looks like.

Is that a inline reg from a Wrath? I have the same type of regulator laying around.
NaftySquared is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump