Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 08-09-2012, 06:08 PM #1
Danny96211
cash for your iphone
 
Danny96211's Avatar
 
Join Date: Jun 2012
Location: NYC
Danny96211 posts videos on PbNation
Danny96211 supports Empire
Gog envy upgrades?

I want some upgrades/accessories for my gog envy. Im tired of All of the stock parts and i want it to stand out. Im already thinking of ordering some new grips for it but are there any other upgrades/accessories for it? I want a Q lock feed neck for it but dont know which ones will fit it. I found a 7/8 Universal feedneck by lapco and An ion feedneck. Will either of these fit my envy? I also want a new trigger but dont know what trigger to get. Can anyone reccomend a good trigger? Ive heard bad reviews about the trinity one so im skeptical. Dont want a new barrel right now or a new bolt. The regulator is also good but i might get an on/off asa.
Danny96211 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-09-2012, 11:17 PM #2
[NA]WARLORD
 
 
[NA]WARLORD's Avatar
 
Join Date: Dec 2001
Location: Sunny FLA !!!!!!!!!!!
[NA]WARLORD is a founding member
 has been a member for 10 years
[NA]WARLORD has achieved Level 2 in PbNation Pursuit
[NA]WARLORD supports Empire
I looked on GoG's website and these are the only accessories available from Gog for your gun:

Firebolt – eXTCy, Ion Bolt Compatibility
Dovetail Adaptor
Rechargeable Batteries
Battery Charger
Quick Grip Panel Poppers
Grip Covers
Barrels – Inline, Tactical, The Freak and Freak Junior

as for asa's, I recommend this one: CP-Direct Mount On/Off with Bleed

It's the same one on my SP-1 and never ever had an issue with it. The bleed feature is what sold me.
[NA]WARLORD is offline   Reply With Quote
Old 08-10-2012, 08:38 PM #3
Danny96211
cash for your iphone
 
Danny96211's Avatar
 
Join Date: Jun 2012
Location: NYC
Danny96211 posts videos on PbNation
Danny96211 supports Empire
Thanks, i might just get that asa
Danny96211 is offline   Reply With Quote
Old 10-06-2012, 12:03 AM #4
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Here's my latest VIBE/ENVY project. Have fun. Any questions just PM me
Later,
Blackrain

11 Aug 2011

Vibe arrived today and is in very good shape. Very clean. Thanks to JJohnson for selling this to me. Hopefully this will be a fast one and can be sold just as quick.

VIBE 2 Project:

I have finalized this sale and this should be on it's way on Monday. I'm going to have fun with this one. This is going to be my fun project. It's hopefully going to be a fast project. So keep checking back and see how this one moves along.

I can tell you that the color will be red and that's all I'm saying.

15 Aug 2011:

Minor delay. I'm just going to leave this as stock as possible with a twist. I really like the look of the stock VIBE barrel. I'm going to talk with Staunchy and see if it's freakable. I want to give this a stock look,yet have a great little shooter.

I was able to check out the board today. It works,just not sure if the noid holds air or not. I'll eventually send it in for reflash. I have a few extra boards that I can add to this gun that have already been reflashed.

I'll tear apart the reg and see what it looks like inside. Not sure if it needs new Orings or not. Other wise this gun seem to be in great condition and should be a fast seller to someone just starting out or needs a good back up. We'll cross that bridge when we get to it. If the Cali Air gun Law passes,I might just have to keep this one just for color legality.

A little more update. I had a few extra boards show up with the gun. One board had a bad noid and the other board was just a "NO RESUSITATE". So I kept the noid cap and scavaged what parts I could. The board in the gun seems okay. It had to be tightened and needs air run thru it. Hopefully that fixed the problem.

So two boards will go in for reflash.


7 Sept 2011:

Just waiting for a few items to finish this up. Super Staunchy is still recovering from Super Game orders and I was stupid with my measurements. So delay on my part. I have a neat little hydrograph patteren I will be using. Just something I thought of on a whim. It's going to be different. Hopefully next week this will head out to Oregon Hydrographics to have it covered

Barrel wise,I had a Stock vibe barrel bored for freak inserts. Might use it,then again I got a great deal on some freak JR. fronts and backs. So big decision beore remaining parts arrive and get ready for hydro and ano.

Also ordered a new metal feed, which will be reanodized along with barrel back and reg cover.

So once again we take on another VIBE project. These things are like skittles on MCB lol. However these are very useful little guns and can be made to look and shoot nice. Just a little TLC and they are ready to go. New Orings and some lube will take this gun a long way from shooting crappy to being able to hold it's own in a paint game.

Sure they have a plastic body,but that can be fixed with hydrographics. Cheaper than anodizing and alot more patterns to choose from.

The purpose of this project is to make this compliant to the possible "New Calif air gun law" that might pass in the near future. Which means guns have to be Pink,Yellow,Orange or white.

So we are going to be compliant if I ever have to travel to Cali again :ROTFL:
__________________
"When all else fails,pull the pin and see what's next!"

Last edited by blackrain : 10-06-2012 at 12:06 AM.
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:04 AM #5
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
10 Sept 2011:

The new feed has arrived. I just picked up a Tech-T L7 bolt very cheap. So improvements thru low price searching/shopping is paying off.
This is how I like to build projects,cheap and with nice improvments. I picked up new Freak Jr. for $15 on MCB. Matter of fact,I picked up 3 for $45 shipped,all brand new with freak insert. Just going to mill off the UGLY muzzel brake.

So this project is moving right along and we are about set to start building. Just waiting on a few more items.


17 Sept 2011:

Got word a few days ago that the stock barrel has been freaked and the reg cover is finished. That seems to be it. The gun is ready for final disassembly and preps for hydroghaph.


20 Sept 2011:

Just about ready to ship. Reg cover and Freaked stock barrel has arrived. Have to trim the reg cover just a hair,so that the horse shoe clip sets in properly and will be safe for use. Freak front is heading to my Uncles lathe for a tip removal this week. I hate the tips on freak Jr's.
I have contacted Oregon Hydrographics for shipping and cost info. So hopefully this week it will finally go out for completion. Will be sending Bazooka boy one part for ano.


22 Sept 2011:

Freak tip is cut off and reg cover has been trimmed down to fit. Word has arrived back from Oregon Hydrographics and I'm ready to send as soon as I figure out the color schematic. Might even change the print I have chosen. We'll see when it's done.


25 Sept 2011:

Body has just come out of the dish washer and is ready for packaging. Finally going out tomorrow :drool:


28 Sept 2011:

Purple KILA screw kit has been ordered. I like these kits,give the finished product a nice touch.

The gun has arrived at OHG. Can't wait till it is finished I guess I'll just order clear VIBE grips for it. Can't really think of anything that can go with this design.


3 Oct 2011:

Minor issue. Seems the L7 Bolt I bought was not for a VIBE,but for an ION. Just had a bigger bolt stop. Well I ordered a new bolt stop today,which cost me an extra $9 to ship,but I also got the new fire cannon plug for free. Seems that Tech-T is recalling all of these. Even though I had to pay an extra $9,I'm still way under the actual price of a new L7.


4 Oct 2011:

Sometimes you just can't find the correct grips to fit. There is also such thing as design overkill. To make this worth my while,I'm just going to throw on some clear Custom grips made by Stinger. Clear goes with anything,just like black and chrome does. I ordered these a while back and had them laying around. Might as well use them.


6 Oct 2011:

The Tech-T parts arrived yesterday. Now I have a complete bolt ready to go. All the parts are here except the body barrel and grip frame. I'll be adding more pictures soon.


10 Oct 2011:

So today I had two stainless steel VIBE nut and bolt kits arrive. What I will be doing with these kits,is replace the rusted looking screws I have on both of my VIBES. Those will only be internal screws. The outer screws will be the anodized screws that you see in both projects.


18 Oct 2011:

So today I got my UPS delivery number from Oregon Hydrographics. Gun is on the way. Hopefully it will be here before this weekend. Pictures soon.


19 Oct 2011:

Just looked at UPS tracking and this should me here tomorrow. I hope it's what I thought it would look like. I know it left as a high gloss. I can't wait to see it. I'll have all day Friday to get this up and running. Hopefully I can use it on Saturday :drool:


10 Nov 2011:

Well I'm just about finished. I have added a DF and and will be trying to match with an air line. All that's really left to do is install the horse shoe clip in the lower part of the regulator. Add air and adjust at the chrono.

11 Feb 2012:

An MCB member posted that Virtue was having a sale on boards. So I head on over and find Vibe/SP1 boards at $67. That is a very good price. So good, I bought two of them. I'll be buying two more in the very near future for both my SP1s.





The VIBE:

Once again an SC Village rental from Titus sale. thanks to JJohnson for selling this to me. JJohnson told me it comes with a few more items. Included were the reg,stock feed and two boards.

The body needs a little refurb. I'll have to pull out the jewler's files and do a little touch up. After all these were rentals at some point in their lives.






Time for a few upgrades:

Same as the last VIBE I did. I'll be adding, Detents, metal feed, probably a reflashed board,a new reg cover and a freak barrel system. Iam not using the freak JR kit you see in the picture. Have changed direction with the freak system I'll be using.

Update:

I won't be using a metal feed. I have decided to keep this gun as much stock as possible. Not sure why,just feels right to do with this project.












I was going to use the above freak barrel,but switched out to this freak system and a stock Vibe barrel I had freaked. I actually like the older FREAK backs. Gives it that nice "throw back look".








The Bolt:

Tech-T L7 bolt

Picked this up cheap on Ebay. Bought it for under half the price of a new one, that included shipping. In great shape. It had a little wear on the front,but nothing that will hurt performance. I had to repurchase some parts. I needed a new bolt stop,because this belong to an ION. The back plug was free from Tech-T,because the one I had was recalled.









Blackrain Reg cover:

Super Staunchy has once again made one. I like this type of cover. It rotates,it's solid and it's mine This is also very smooth so it can be anodized and Lazer engraved with a picture. No knurling to defuse the work.

Some people might not like it,but I do Just slip it over the reg and screw in the reg. Then just put back on the bottom portion of reg and snap ring. It's that simple.





Stainless steel GOG and KILA anodized screw kits and Grips:

Yep these will replace the worn out rusted looking screws. Both internal and external.




Forgot I ordered these grips when I ordered the POW/MIA grips. Finally found these things. Stuffed in my junk box of useless parts I have.


__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:04 AM #6
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Off to Oregon Hydrographics:

This will be a little different style for me. I've been told I have to many red and black guns.





I was going to use "Hello Kitty", but could not get it in a pink background. The red threw off the whole project and purpose.





So instead I am going with a lightning style, Just as you see it in the picture:




Body is back from Hydrographics:













Getting the breech ready to go:

I have added Orange detents, multi fire board (Reflashed), and Tech -T L-7 Bolt and new breech O-rings:






Let's lube the bolt:

It's all lubed up. No need for pictures,It's common sense where to lube. I use Monkey Poo from O-ring Monkey (They are my sponsors). Works well and smells like Bannanas. End plug in lubed and inserted (I know sounds sick). Bolt and bolt stop are inside the gun and ready to go.


Let's put this thing together:

It's all together waiting on parts from GoG. I've added the Stainless Steel screws to the feed,body stop and the ASA. I have the purple screws holdinging the frame and body to the breech.


Drop forward:

I'm using a chrome System X DF. It goe with and color. It's getting hard to find a decent Blue or Purple DF these days.





Final Tuning:

Let's put some air to this thing. Reg is rebuilt and ASA is on. Keep our fingers crossed so we don't blow the noid.
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:07 AM #7
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
This gun shot excellent. It has had about 15000 rnds thru it and has only broken one and it was my fault. I didn't turn on the hopper.

Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:27 AM #8
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
This was my very first vibe. I had never even shot one before. They were such a simple gun.
Later,
Blackrain



UPDATE:

13 Mar 2011

Ordered a new orange bolt and Virture board. Thought I would give this gun a new look on the inside. Eventually there won't be anything stock except the bolt lol.


6 march 2011:
It seems the regulator has failed. So the stock regulator is off to have a slip on sleeve made,reanodized and reengraved with the originol first name.

Will be adding a Virtue Redefined board to this gun. Might as well get a little zing to my play.


4 November 2010:

Well the gun arrived and shot right out of the box, dirt and all. Well I was really happy with the performance.

Rule #1: If it works don't mess with it :ROTFL: Yep after I cleaned it and replaced all orings,I blew the Solenoid and The regulator leaked like a water faucet. The snap ring under the reg adjustment screw even fell out. So these vibes have seen a lot of field time.

Rule #2: If it's a rental, you take your chances of it woking or not. Then again that's all the fun of buying a "BEAT ALL TO HELL" rental.

Rule #3: Don't get mad,just take a break and walk away for a while.

Rule #4: Have fun doing the fix.

Mine actually said SC Village on the side of it,so if that's where it came from,then it's expected to look the way it was. You can tell this gun had a lot of play time on it. The dirt, thousand of rounds of paint that was soaked into the body and the smell was all that was holding this thing together.

Maybe the Hot water and Dawn Dish soap scared it.


5 Nov 2010:

NOTE:
Break thru on the regulator. I found out I had to close the regulator all the way and feed air to the gun slowly. Plus closing it,helped to seal the orings in place.

Well the gun shoots and the reg holds air. Tried it on my ION. The only issue I have is that the noid is leaking and I know it's my fault. So I'm waiting for GOG to send a new one.



10 Nov 2010:

Well the new noid and regulator arrived. Guess I'll hold onto the regulator,because the old one works just fine. It seals well and the gun shoots just fine. I have added a freak tip and it will also get a refurb along with the body and frame. So the gun has been aired up and fired. Guess I'll be looking for a Blackheart or newer board. I'm just going to shop around till I find the right price.

Will be posting more pictures once the gun body comes back from Oregon Hydrographics.
__________________
"When all else fails,pull the pin and see what's next!"

Last edited by blackrain : 10-06-2012 at 12:35 AM.
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:28 AM #9
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
11 Nov 2010:

I ordered custom made grips from Stinger Paintball Designs.

http://stingerpaintballdesigns.com/

I'm going to "THEME" this gun. It's something I always wanted to do with a gun and it's something that I really believe in.



16 Nov 2010:

Just in from Stinger Paintball Desings

Hi Steven,
The order shipped today confirmation number 9101128882300415574027.
Thank you,
Tracy
Stinger Paintball Designs, Inc.
Providing the Ultimate Enhancements for your Marker!
www.stingerpaintballdesigns.com
Office: (951) 461-6662
Fax: (951) 696-2522


18 Nov 2010:

I am now officially into cost over run. I decided since I was going to give it a new look,I might as well give it a brand new stock board. This will give me the option of CO2 or HPA. I'll have select modes of fire to enhance my play on the field. Plus the new board will also go with the theme I have for the new look.

I'll keep the stock rental board as a back up for that "Just in case situation".

So I am now beyond the cost of a new VIBE/ENVY. That's what builds are all about. I estimated I am now $96 dollars beyond the real price of a VIBE/ENVY. Even with sponsorship help it's still costly. I still need to buy one more item and then I'm done.


19 Nov 2010:
Custom grips from Stinger Paintball Designs arrived today. :drool:


20 Nov 2010:
Since no one is reading this now,I can safely post up what the body graphic will be and what the grips will look like.

1 Dec 2010:

As of today,body was prepped,painted and dipped. Should be going to clear coat today or tomorrow. As soon as Mike sends me some pictures I will post for all to see.


7 Dec 2010:

Got word that the marker is being shipped back today. It's all completed and now ready for assembly. Should be here before Saturday. Just depends on UPS delivery.


9 Dec 2010:

Body came back today. I have started to assemble it. It's not ready to play with,still a few more things to be done.


19 Dec 2010

Well I have been able to locate a lazer engraver. We talked about what I needed and had no problem with it. So the parts are leaving this week. I have the gun together and it shoots. I'm using a different regulator for it. It's alot smaller then the originol. I have put in a multi select fire board.
It will come apart one more time so I can put in the detents. So far I have not put paint thru it. That's not going to happen till everything is back together.


25 Dec 2010:

Well final pics are up. I changed out the Bottle ASA to a black CP. As always I have one piece of chrome as my trade mark. Everything that I have used goes well with the whole look that I have chosen. Just one more thing to add and it will all be done and ready for the 2011 season.


8 Jan 2011

Thank you to Paintballer 187 who did an excellent Lazer engraving job. I really appreciate it. The regulator is back and is installed and the project is completed. Just one more thing left to do.


11 Feb 2012:

An MCB member posted that Virtue was having a sale on boards. So I head on over and find Vibe/SP1 boards at $67. That is a very good price. So good, I bought two of them. I'll be buying two more in the very near future for both my SP1s.






BIG SHOUT OUT TO TITUS

Great person and great Sponsor. Thanks for buying this RENTAL LOT of "All Beat To HELL" Vibe paintball guns. Now we all have a winter project.





Not sure what it looks like. I'm waiting on it to come from Titus. Can't argue for $25.00. This is from the big gun lot sale he was kind enough to purchase for the MCB crowd.

So here is where everything will unravel,from start to finish. Hopefully not a lot of repairs,but only minor ones.
I'll learn about this gun just like everyone else on MCB will. So if you have suggestion or knowledge on/of the/this marker please let me know I would appreciate any help you can offer.
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:28 AM #10
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Very skanky looking













Let's try to air it up before we clean it up:

Aired up and shot beautiful. I was really amazed at how well it shot. The dirt and crud didn't affect it at all.



Let's take it apart:

had to replace all the orings. Look how nasty this was inside. I guess rental fleets are all that well taken care of.





__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:31 AM #11
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Good thing Oring Monkey is my Sponsor:






Here's some of the dirt that I pulled out of it:






Let's clean it up:

Cleaned all the body and internals. Replaced oring. Dawn Dish soap and Hot water is a good cleaning combination.






What do I have to order or repair:

I need a new solenoid and regulator. At this moment,my regulator is unsafe for use. Also need new detents. Actually the reg is working properly now. However the adjustment screw snap ring fell out. I'll find a new one at the local ACE hardware. I just ordered the new reg and solenoid. They should be here by This coming Friday.

The grips were a little worn,nasty and ripped. I replaced them. Detents looked as if they were never replaced. They were a little beat up and I had a little trouble getting them out.

So if I wouldn't have blown the Noid,my total repairs would have been $15 for detents instead of $55 for noid and reg.









Off to refurb:

Going to my sponsor Oregon Hydrographics. Going to give it a new look.







Freak Barrel System:

Decided to purchase an ION freak back from a member on MCB. Might as well,since this is an unofficial MCB build. I have always liked the Freak Barrel system,I just have not found anything better other than boring my own barrels. Since I have alot of tips laying around and I also own an ION,this is just smart money to spend,two for the price of one.





Replacement parts arrived:

Detents are here.



Solenoid is here.



Regulator is here.



Freak Back is here.



Custom Grips are here.




Feed neck is here:





Early sneak a peek pictures from OHG:

Here are a few pictures I received. Not a great look but it's something.







Back from Oregon Hydrographics:




__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:31 AM #12
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Off to Lazer Engraving:

Few more things to add. Not done yet. This was a last min. idea.

What the plan is,to have the names of MIA/KIA added to the reg and freak back. Like I said this gun is suppose to send a message and that is to "Never forget that some are still not home". Iam a military person, and to me the more I show this gun,the more people will not forget.

So some pics before it goes off to Paintballer 187. It's done and ready to play with,just needs the laser engraving completed:











This how the printing will sit ont the body of the regulator:





New Orange Bolt:

Let's see how this bolt works out. Found it for $20 new on ebay. If it works out, then I'll put one in my ION.









Final assembly:

Here she is all assembled,not leaking and functioning as if it were new from the factory.

First off I would like to thank John (DUCE on MCB),for giving me the HONOR and allowing me to put SPC Jimenez's name on this Gun Project.

Thank You to Eric (Paintballer187 on MCB) for doing the great job of Lazer Engraving on the regulator and for the quick turn around.

This was a special project for me. This is something I have always Believed in. It is something I have always held Dear in my Heart.

This Country and it's People should never forget those who have not returned home,Who are/were missing but are now home, Killed in Action and those who will never return.

Even though I never knew them,they are still my Brothers. They will always be family and will always be in my prayers till I die. I'm not sure what sadness many feel, but the sadness I feel is heavy in my Heart. These individuals have been and given the Ultimate Sacrifice for this Country and for other Countries.

When they were called, they went with little complaint if any. Fought for the Freedom of others and helped to keep the enemy from shores. They were Fathers,Sons,Husbands, and Lovers to many. Many will never feel that touch again. So when you hug you Children, Spouse and Family, remember you are able to do that because of those who can't.









As with all things Military,there is always a story that represents things.


The Lite Grey Body repesents the haze of smoke from Battles past and present.

The Barb Wire represents those that are held captive and have not yet returned home to us.

The Black represents those confined and those who may or will never see the light of day.

The Red represents the blood of those who have given the Ultimate Sacrifice for our great nation and it's people.

The US Army repesents just one branch that many of us have served in and fought along many we never knew, but call Our Brothers in Arms, and would give our life for them if need be.

The Soldier's name is that of one who was taken from us. He represents not one,but many who have been taken from us.The name is printed to the left side of the regulator so that individual and others will always be held close to my Heart and protected with my hand (or others),so they may never be hurt him again.

The Grips are a reminder so that ALL OF US never forget those who have SACRIFICED for this Great Nation.


How does it perform:

I'll let you know.



Field test:
Have to wait till it's all together and I get a chance to use it.


My thoughts:

To be honest it's not a bad gun at all. I would improve the solenoid hoses with regular Cocker or ION hose. I think what they use now actually has to be part of the design. I kind of went over board on this gun a little. I wanted it to stick out and send a message at the same time. I think the color and pattern are what really makes it stand out.

I'm hoping the "Barb Wire" pattern will be noticed. I know some people out there will probably want to say "It's white you can only use it for a speedball gun" Guess what,I don't play speedball. This will be an everyday woods gun. I like things to stick out and be noticed. For me, changing out eye covers from black to green isn't custom. Anyone can do that. This gun might not be all that great,but to a new player,it will have some kind of intimidation,till they realize how bad I suck at playing :ROTFL:

I also thought this would give GOG or other players a choice of body coverings. Seem alot of companies now are doing Graphic/sublime anodizing. Well this is a cheaper alternative to sublime/graphic anodizing. This gun body has some beautiful lines to it and I'm hoping it makes the Barb Wire flow.

One thing I do/did was go into "COST OVER RUN". As most of my projects do. I don't know why. I guess once I start looking on the internet and started to think of ideas,and my mind just runs wild. I'm not looking for the ultimate shooter with the best air efficiency,I'm just looking for the best looking marker :rotfl:

Later,
Blackrain :drool:


Below you will find a few helpful links for the SP/GOG VIBE/ENVY:


Important info from Lomarandil on MCB. Something everyone can use:

First, turn off the marker, remove the battery, leaving the grips open. By depressing the trigger and then connecting the battery, you can flip between three settings:

1 flash = billy ball 0.5bps
2 flash = "rebound ramping" whatever this is
3 flash = semi-auto




Gog Tech service:

From GOG Tech Dept. Now we know they can do repairs and have parts on hand. This is a good sign:

Steven,

We have all of the parts you looking for. We are also excepting returns for service. We are able to fix all of the old Smart Parts markers.

Thanks,
Keith Short
Technical Service Manager
GoG Paintball USA
100 Station St.
Loyalhanna Pa 15661
WWW.GOGPAINTBALL.COM



Helpful regulator and CO2 videos:

http://www.youtube.com/watch?v=-N7uO...eature=related

http://www.youtube.com/watch?v=zRaL5XpIUKY


Modes of fire how to change from CO2 to HPA:

http://www.youtube.com/watch?v=0FdU1...eature=related



Vibe Quick Start Manual:

http://www.wolfpackpaintballteam.com...uick-Start.pdf
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-06-2012, 12:32 AM #13
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Hope these help you guys. I know some have seen this and others haven't.

Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-08-2012, 12:51 PM #14
Danny96211
cash for your iphone
 
Danny96211's Avatar
 
Join Date: Jun 2012
Location: NYC
Danny96211 posts videos on PbNation
Danny96211 supports Empire
Those designs on the guns are sick!!! to be honest i didnt read everything you posted, because you wrote a lot lol. But i really like the design on the second gun. Where did you get it done and how much did it end up costing you? I want that design on my envy!
Danny96211 is offline   Reply With Quote
Old 10-08-2012, 01:18 PM #15
blackrain
 
 
blackrain's Avatar
 
Join Date: Nov 2001
Location: Belfair,Wa
blackrain is a founding member
 has been a member for 10 years
blackrain supports Bob Gurnsey
Quote:
Originally Posted by Danny96211 View Post
Those designs on the guns are sick!!! to be honest i didnt read everything you posted, because you wrote a lot lol. But i really like the design on the second gun. Where did you get it done and how much did it end up costing you? I want that design on my envy!
Well thank you.

Oregon Hydrographic face book:

https://www.facebook.com/#!/oregon.h...hics.3?sk=wall

Web Site:

http://oregonhg.com/

The design on the second gun (POW/MIA) is called shadow barb wire the names on the gun are actual soldiers and Marines that have died in the War on Terror (Personally Given to me by friends or family)

As far as price goes you will have to contact Mike at OHG. Also pay close attention to my pictures and see what can be covered and what can't due to friction points.

Later,
Blackrain
__________________
"When all else fails,pull the pin and see what's next!"
blackrain is offline   Reply With Quote
Old 10-09-2012, 03:47 PM #16
Reactor
Kansas State Paintball#22
 
Reactor's Avatar
 
Join Date: Jul 2009
Location: Kansas
Reactor is playing at Living Legends VI
Reactor is for the Gunfight
Reactor is for the Gunfight
Reactor is an NCPA player
leaking due to techt bolt oring, it is the inner bolt stop o ring as it leaks down the center of the bolt, ordered an o ring kit from techt and i dont think it was right cuz it still leaks, is what is the common number for this o ring if it is available?
__________________
Visit Kansas State Paintball
Kansas State Paintball on Facebook
President for Kansas State Paintball Team
KSUPBC #22
Proud Vanguard Demon owner
Proud Vanguard Creed owner
Reactor is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump