[OldPoster1]

Will the CP mini direct mount asa work on any marker? I have a WGP slider frame and just wanted to make sure it would work well before I order it. Any help is appreciated, thanks.

[gamer565]

For the most part yes, unless it's a marker that has a gas through frame.

[Necrogen98]

Or non-industry-standard parts such as the offset holes in many Spyder bottomlines.

[Rebel_816]

Originally Posted by OldPoster1

Will the CP mini direct mount asa work on any marker? I have a WGP slider frame and just wanted to make sure it would work well before I order it. Any help is appreciated, thanks.

it should fit, the ones you have to worry about are things like spyders that have oddball screw locations on the bottom of the frame instead of the holes being inline like everyone else makes them.

[mymutter]

The cp mini mount will work on the wgp slider frame without any problems. I wanted to check if the new generation of tiny tank regs would fit and they will no problem (my legend stock asa will not take my guerilla tanks because the gage hits the frame)

[YeloSno]

Direct mount will work with the WGP frames unless it's a worrblade (the electronic eblade frame with a square guard.).

Dovetail means that it slides onto a rail. Since it's a direct mount, it will work.

[bhotz]

yes unless it has gas through frame

[Rebel_816]

Originally Posted by YeloSno

Direct mount will work with the WGP frames unless it's a worrblade (the electronic eblade frame with a square guard.).

Dovetail means that it slides onto a rail. Since it's a direct mount, it will work.

will still work on the worrblade, it has holes for direct mount too. might be in a slightly awkward position though with the little drop forward they have.