Originally Posted by EliteDM9Assassin
ok just got my Vapor this board is confusing how do you set up your BPS. when mine turns on it says all kinds od modes that i dont want, all i want is PSP and Semi for NPPL
Hold the trigger down and power on the marker (to get into programming mode)
click the trigger to scroll down to programming menu, then hold the trigger down to enter into Programming Menu.
hold the trigger to select profile A
click once to select firing setpoints and then hold to enter
click a few times to get to BPS eyes on (use the power and eye buttons to raise/lower the value) (15= 15 bps)
BPS Fine is the tenths value (5 = .5 bps)
BPS eyes off shouldn't really matter, because you should NEVER turn your eyes off
when you click to scroll through, eventually you'll see a black arrow in the top left corner. Hold the trigger and it'll go back a page.
now select firing mode enable
turn off all the modes you don't want.
semi = semi (true semi-auto)
burst = 3 round burst (NOT PSP)
reactive = 1 shot per pull, 1 shot per release
auto = FULL AUTO (illegal everywhere? except for Pain or Paint at the end of the day)
ramping = ramping based on settings
tourney 1 = PSP
tourney 2 = NXL
tourney 3 = Millenium