[zs89]

i just bought a white axe from my local shop (my first new electronic gun ) and im wondering what i need to do to it before i fire it next weekend ive seen some people refer to a break in period, do i need to do anything special or just take it out and put some paint through it?

[ElHefe2000]

Just put paint through it.

[Bezzle]

The Axe is a great gun right out the box. Put some
cases through it to break in the bolt like any other gun.

[Starks]

Originally Posted by zs89

i just bought a white axe from my local shop (my first new electronic gun ) and im wondering what i need to do to it before i fire it

The first page of the Axe owner's manual reads: "*READ OWNERS MANUAL BEFORE USING*" There's a start.

[[NA]WARLORD]

Originally Posted by Bezzle

The Axe is a great gun right out the box. Put some
cases through it to break in the bolt like any other gun.

You mean reg, why would you need to break in the bolt ?

[SNAKESNIPER (Banned)]

All of the dynamic o-rings on the bolt guide need to be broken in as well before they "settle in", if you catch my drift.

[[NA]WARLORD]

All of the o-rings will break in thru use. But the main o-rings that need to break in first are the reg o-rings as they are the ones that control consistency and overall operation of the gun.

[Tenit]

Originally Posted by [NA]WARLORD

All of the o-rings will break in thru use. But the main o-rings that need to break in first are the reg o-rings as they are the ones that control consistency and overall operation of the gun.

I'd agree with that the reg seems to be the major thing needing a break in on the Axe. I'd go with the drops of oil right away if I was doing it again, that really helped to settle mine down.