[justinNTX]

Ok nation, last week I played the first NCPA event and it rained the entire time. Right off the bat, my eyes stopped working. Whenever I turned the board on, the eyes would detect the first ball. Once the trigger was pulled, no ball was detected and then I would get the faulty eye system symbol [ ]

Once I got home I opened up the board, cleaned the eyes and took it all out to dry. There was very little moisture inside.

Now my eyes still arent working. When I turn the eyes off and pull the trigger, I have real bad fsd. the bolt cycles but not all the way. The ball that is in the breach goes about a 1/4 way down breach and thats it.

Once I take the hopper off and clear the ball, then the bolt will fully cycle.

Everything is lubed up and cleaned. Still having troubles making the geo shoot properly.

Any suggestions?

[justinNTX]

I put in a brand new battery, thinking that would fix the eye situation. but no luck

[justinNTX]

Dwell- 12.5
FSD delay- .30
FSD comp- 5

[ammoeller]

Have you checked your ball check valve in the solenoid? That is a known problem of fsd. If the red ball is too small or large it will be a problem.