[Sammy417]

Gotta black magic cocker with a oracle front and it's totally mechanical and wanting to convert it to electrical.

What am I getting into!?!?
What parts do I need to get
Do you have any parts?
what frame and if you got links to parts post em!

[fearsnear]

honestly i like my e1 prostock over my psychoballistics mech cocker, but thats my preface

[MikeM]

Originally Posted by Sammy417

Gotta black magic cocker with a oracle front and it's totally mechanical and wanting to convert it to electrical. What am I getting into!?!? What parts do I need to get Do you have any parts? what frame and if you got links to parts post em!

If you want to convert a mech with an eblade kit, you'll need to decide if you want to use the eyes or 'run it blind'. To use the eyes, your body would need to be drilled with a hole for the eye sensor and another hole drilled and tapped for the eye cover screw.

If you don't want to drill your body (undrilled bodies tend to be more sought after), with force fed hoppers, running an eblade 'blind' is an option.

Eblade kits can be found in various colors. Easiest to find are black and chrome. I've seen red and blue pop up from time to time.
__________________

[cmdrsuds]

I built a cocker last year and put up a thread and asked A TON of questions

Hope this helps - link to my thread \/
http://www.pbnation.com/showthread.php?t=3684910

[Nickdennis]

You will need an eblade frame, a board, a sear, a solenoid and solenoid housing, an eye and eye cover, and any other misc. parts you may want

[hmcl281]

go to eclipse's web site and dowload the eblade manual, should have the how to guide