 |
10-03-2012, 04:22 PM
|
#1
|
|
Blind Aggression
Join Date: May 2005
Location: Cincinnati, OH
|
2011 Rail Low Velocity Issues
I cannot get my Rail to shoot over 240ish fps.
I have the dwell turned all the way up now and the reg backed all the way out. The gun is shooting consistently around 240fps with those setting so how can I get it up to 300fps?
btw: stock dwell and backing the reg all the way out gets me to 220ish
|
|
|
|
10-03-2012, 04:47 PM
|
#2
|
|
Join Date: Jun 2012
Location: nyc
|
The dwell should be around 14, lowering it would help. Make sure the guns well lubed and replace all the orings.
|
|
|
|
|
10-03-2012, 05:13 PM
|
#3
|
|
|
What!? My dwell wont even go tht low wit my techt. My advice is to keep it at stock dwell.
|
|
|
|
|
10-03-2012, 06:29 PM
|
#4
|
|
Blind Aggression
Join Date: May 2005
Location: Cincinnati, OH
|
Quote:
Originally Posted by shinjinian
The dwell should be around 14, lowering it would help. Make sure the guns well lubed and replace all the orings.
|
Dude, stock dwell on these guns is 40! At 40 the gun fires around 220fps. I have cranked it up to 50 now and I am around 240fps.
Also, bolt assembly has been freshly lubed and the battery used is brand new. |
|
|
|
|
10-03-2012, 07:00 PM
|
#5
|
|
Join Date: Apr 2005
Location: United States
|
Did you take apart the hyper 3 recently? If you did, are you sure you got the shim stack put back properly?
|
|
|
|
|
10-04-2012, 12:57 AM
|
#6
|
|
Dye Tech
Join Date: Jun 2012
Location: San Diego, CA
|
Check to make sure your shims are stacked correctly like nonameputs stated, then you may need to add another shim. In some cases this requires a new solenoid as well. If your gun is still under warranty then the parts are covered.
|
|
|
|
|
10-04-2012, 01:25 PM
|
#7
|
|
Blind Aggression
Join Date: May 2005
Location: Cincinnati, OH
|
Does the shim stack look correct? I am really struggling to figure out what else the problem could be. |
|
|
|
|
10-04-2012, 01:40 PM
|
#8
|
|
|
Have you tried zero'ing out your reg and setting it back to stock?
|
|
|
|
|
10-04-2012, 02:00 PM
|
#9
|
|
Dye Tech
Join Date: Jun 2012
Location: San Diego, CA
|
Pic isnt showing up for me. Should look like ()()()()()()
If you add a shim, then you would want it like this ()()()()()()(
|
|
|
|
|
10-04-2012, 03:04 PM
|
#10
|
|
Blind Aggression
Join Date: May 2005
Location: Cincinnati, OH
|
Quote:
Originally Posted by Syphorus
Have you tried zero'ing out your reg and setting it back to stock?
|
Yes.
Quote:
Originally Posted by HotxRod
Pic isnt showing up for me. Should look like ()()()()()()
If you add a shim, then you would want it like this ()()()()()()(
|
My shim stack is correct then. I do not have an extra shim to add-on, but I don't believe adding one would increase my velocity by roughly 40fps. |
|
|
|
|
10-04-2012, 03:19 PM
|
#11
|
|
Gun tech!
Join Date: Sep 2007
Location: N.C
|
Quote:
Originally Posted by NaftySquared
Yes.
My shim stack is correct then. I do not have an extra shim to add-on, but I don't believe adding one would increase my velocity by roughly 40fps.
|
Actually u'd be surprised how much a shim can add, your adjuster screw wont bottom out either.
heres my suggestion.. (find a friend with another reg, and try that..) or call dye and order a shim.. which is cheap. |
|
|
|
|
10-04-2012, 03:40 PM
|
#12
|
|
Blind Aggression
Join Date: May 2005
Location: Cincinnati, OH
|
I wish the Hyper 3 didn't have the goofy small threads so I could try another one of my regs on there.
I guess my next step is to call DYE to order a shim and see if that does the trick.
Thanks all for the responses so far.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
