Long story - received a "MT FLY" lcd that apparently was drilled while drunk. I managed to rescue it by drilling out for DM eyes and re-align the holes. All is well and good, totally assembled, go to put the volly on and find the lpr edge banged in and threads screwed up.
No idea how I never noticed this. I attempted repair - not sure i didnt do more damage.
So - either need to find/borrow an M19x0.75 tap, or send to BOB/TAG for repair.
I live in the sticks, so there is no "local machine shop". Doubt they would have the right size anyway.
There are decent threads, just the front two are shredded so it never grabs.
opinions? (you can skip the "dont bother ace'd guns suck line", i disagree).
"Even now in Heaven there are Angels
carrying savage weapons."
"Did you ever notice how in the Bible, when ever God needed to punish someone, or make an example, or whenever God needed a killing, he sent an angel
BALLERS INC DESTROYED MY ANGEL
Blue Black Impact Angel LCD, Doodoo Brown Dark Angel LCD, Dark IR3 & Ripper angel
94 Tippmann Pro-lite (old reliable)
- New Feedback