[masterofTHUMBS]

on the black magic, it doesn't have a spot for a gauge. There is a plugged hole but that is for if you want to move the input line. Use an allen wrench to remove the plug on the bottom of your front block and install the gauge there. If your vertical ASA is angled forward, you may need to slightly file an edge of the gauge, mine would touch the vertical ASA and I couldn't get the front block lined up perfectly so I filed just enough to where it lines up right.

[dezz-nutz]

Its a mini cocker my reg is in that hole on the front block I can make a gauge all I need is a old skool Asa n plug othe hole where gauge isn't

[Dk-79]

You can put a gauge on a black magic reg. That's what the second hole is for. It's a talented hole, with many talents.

[sucka T.]

the second hole...a healthy alternative

[mr_squishy]

I wouldnt put that on your ion, they only run about 180 psi. over 200 would toast it.

You could remove your lpr and plug your gauge in there, or get a tee.

Or cause back in the day gauges made your **** look really cool, you could drill and tap the block.

"shrugs"

[dezz-nutz]

Originally Posted by Dk-79

You can put a gauge on a black magic reg. That's what the second hole is for. It's a talented hole, with many talents.

But then the gauge will be in the way of my kungfo grip on reg !

( didn't even think of that thanks for the idea)