Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-01-2012, 04:03 PM #1
MacDave
BALLER~STATUS
 
Join Date: Mar 2003
Location: Vacaville, CA *707*
 has been a member for 10 years
E-bolt clippard ram

I'm looking to build my own e-bolt. I've heard of people using a clippard ram instead of using the factory ebolt rams. Every post I've found has links to parts but if you click they go to the clippard home page. I'm wondering if someone has a part number or at least dimensions to one that will work
MacDave is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-04-2012, 12:10 PM #2
spinny2559
just missed 2k4
 
spinny2559's Avatar
 
Join Date: Jan 2005
spinny2559 is a Supporting Member
If you just look inside the gun you can take your own measurements to determine the dimensions and stroke.
Other than that, I should have an E-bolt ram lying around. If I dig it up I can measure.
Keep in mind, the stroke doesn't need to be an exact length, just the necessary length or slightly longer.
__________________

98 Custom Low Pressure Kit parts available, contact me!

TONS of solenoids and solenoid parts F/S/T!!

spinny2559 is online now   Reply With Quote
Old 10-04-2012, 12:21 PM #3
MacDave
BALLER~STATUS
 
Join Date: Mar 2003
Location: Vacaville, CA *707*
 has been a member for 10 years
I'm still looking for a gun. The stroke I've already found should be 1.33 ideally but 1.5 is the closest option. My concern is more with the piston and rod diameter. I don't want to go too small and end up bending the shaft, but I also don't want to go too big and need too much lpr pressure.
MacDave is offline   Reply With Quote
Old 10-04-2012, 03:26 PM #4
spinny2559
just missed 2k4
 
spinny2559's Avatar
 
Join Date: Jan 2005
spinny2559 is a Supporting Member
The diameter of the shaft shouldn't matter too much as long as it is secure in the housing. You should be more concerned with finding/making a housing that holds it securely than the ram itself.
__________________

98 Custom Low Pressure Kit parts available, contact me!

TONS of solenoids and solenoid parts F/S/T!!

spinny2559 is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump