[Blitchy]

I have no idea if this has been done before but well onto the pics (now if i can get the damn eyes to work...)

and yes i know ltd's eat batteries if left in i was bored just got a z2 so i said hey alot of the parts look the same and bam i have both a ltd and a Z2 to clarify









so heres what i found out for all you reg prophecy owners out there that hate there stock feednecks ie my Regular ltd won't fit into my Marq Rapper because of the feedneck. the parts to change it across cost $50, which is the bottom cage, the battery Cover/Floor, the shells and the anti jam are all you need, all ltd or even stock v2/v1 boards will fit in a z2 back plates and all, again i did this because i was board i'm also cooking up an idea on how to make my eyes work on the ltd and i may just leave it that way..

*final note* if your going to go drive cone etc. you might as well buy a z2 loader as your looking at upwards of $85 to "convert" it.

[Zippin35]

so its a ltd in a z2 shell? Sorry I'm not big on modding things so I need the clarification of a 7 year old

[pbkidminion]

Just wondering, did it seem lighter after you switched the shells and stuff?

[Blitchy]

definately lighter and i got the eyes to semi work but not without pinching the board up i ended up just switching back because without the eyes theres really no gains to be had

and yes an z2 with ltd board basically for about 50 bucks buying the shells all 3 pieces and the bottom case (where the z2 feedneck is) you can have all the advantages of the z2 feedneck with an old proph