[inmylife2415]

Originally Posted by Darkapollo

Will has come out with a new screen for the older OLED boards with faulty ones. The USB boards have not had the screen issue, yet.. Mines alive and kicking for 3 years now.

Why buy a Chevette when you can have a Corvette?

the screen replacement is out of pocket not warranty and i guess the new screens have sold out already and all that is left are the old faulty ones

[barrel roll]

Forgot to mention that the Tadao board doesn't even have classic mode. That's no Corvette, that is a v6 1986 firebird.

[dbkid0486]

Originally Posted by barrel roll

There is an aftermarket board that fits the SR.

There is no need to upgrade anything on the front end.

So much misinformation...

which company makes it?

and your right, there isn't a need until your qev blows or your ram goes. Then what? Then there becomes a need that can't be addressed. I had an Sr, and it worked perfect besides the ****tty ASA. But there have been so many stories of them crapping out that its almost comical the gun was ever introduced. No wonder ANS was selling them for 180 bucks.

[barrel roll]

I can tell you what is up with the SR ram, through PM. It never was the QEVs craping out. Same with the MP4 rams.

And scenario dream's UTB will run dual solenoid guns. The eye logic works great for break beam, if I remember correctly people has problems with bounce beam?

[Punisherball54]

Originally Posted by cmdrsuds

Go with a Karnivor!!

Half blocking can be nice for speedball as you don't have a back block cracking you in the nose. However, I got used to my Karnivor pretty quickly.. just promise to never half block a Karnivor, that's a sin.

Amen to that!

[YeloSno]

Honestly, SRs as well as Trilogies are bomb.

The trilogies are good because upgrades for them and the gun themself is cheap, but you can pack a super fat punch and only their reputation is what's there to belittle them.

SRs are just apparently tuned ****tily from the factory but are perfectly fine since the pneumatics are the same, if not marginally better than what was on the Karnivor STOs as it was designed to be the reiteration of them for a new generation of cockers and to keep them looking up to date with more current guns.

With that said, they both do use the 11/16ths valve (Spyder, Merlin, Azodin, etc) which makes them quieter due to being a higher flow/lower pressure design by nature.



What I'd do to win both worlds of cost and efficacy: Get yourself your favorite bodied Trilogy, Add an AKA lower tube kit and some aftermarket bolt that doesn't suck, slap on an E-frame of some sort. (NDZ frames look pretty boss and are comfier and come with a better trigger than that's made for all other frame types.) Bam. Done.

[MikeM]

I might be just a little biased , but I'd like to think that this is the 'right cocker'...

Beautiful tri-fade e-Orracle w/zero-b 1.10 board