so i started this project awhile ago and never finished and at this point dont have much desire to. i'll try to get pics up sometime soon.
you pay, i ship
prices are shipped and OBO
paypal only. Gifted or you add fees
black superbolt mini halfblock body-OFFER
i was halfblocking this with a mq. top tube needs cut to spec. pressfit base of the feedneck twisted out.
jcm halfblock bolt, sled, pin, and pump arm-sold
short pin for use with mq
black wgp sf frame-$12
board is in rough shape. needs a battery terminal soldered on, a membrane pad, and i'm not even 100% sure if it works. frame has some scratches by the trigger pin and on guard. but otherwise seems to be in ok shape. has grips, trigger and sear solenoid.
modded aurora etek frame w/ stock trigger-$40?
basically what i did was dremel the back of the frame and made an insert for the standard eblade buttons and screen to be epoxy'd down after anno. i also enlarged the hole for the trigger fang since the eteks were centered and the eblades were offset. i'm no machinist and all the work i did was dremel so its not the cleanest looking right now, but after a little finishing work and anno it should look nice.
FBM delrin wave roller trigger for ego 5-$35
if you buy the etek frame.
this is honestly THE BEST
trigger i've ever felt. super light and smooth with the roller bearing. combined with the crispness of magnet trigger return its almost orgasmic. the closest trigger i've used was the critical on my DM and its still not even close.
zero b board 1.10-SOLD
good shape. no dead pixels
cocking noid with black cover-SOLD
should work, but never tested
spare cocking noid-$20
worked last time i used it
chrome macdev lpr-$30
bought new, installed but never used
superbolt front block with mini asa-$15
has banjo bolt
blue superstock front block-$15
has banjo bolt
bought used w/ a broken wire and never tested. its seperated about 1/2" from the noid assembly so it shouldn't be too bad to resolder.
superbolt 2pc barrel-$15
bob long torpedo reg-$15
should work. chrome top black bottom
superbolt p-block and twist lock bolt-$15
superbolt hinge frame-$20
rest of the stock superbolt parts-SOLD
ram, 3way, lpr, some other random lpr, valve, hammer, springs, ivg, jam nut, cocking rod