AMD Athlon X2 7750 OC
It will be hard to go over 2.8GHz only adjusting the multiplier, especially with the stock cooling. To squeeze more out of it you should lower your HT link multiplier to 5x (1Ghz 5x200 MHz). A lower HT multiplier will help with stability and you can raise the HT link multiplier back up latter (incrementally and testing for stability at each step) after you have settled on a final CPU overclock. With a lower HT multiplier you can also lower the CPU NB voltage (the northbridge memory and HT link controller in the AMD CPU) one or two steps. That will help a little with temps. Even with all that fake ray ban sunglasses
some Kuma samples will not be able to reach 3.0GHz at stock voltage so you may just have to raise up the vcore a step. If you do, I hope you're using something better than the stock cooler, or at least nike air max 1 cheap
have good case ventilation.
My suggestion would be to invest later cheap nike air max
on in a case with better airflow. You can grab an antec 300 for less than 70.00$ (illusion) and it will improve your temps by a very high percentage. The case comes with all the fans fake cheap nike air cheap nike air max 1
max 1 ray bans you need. Just a suggestion =)
Antec Three Hundred Illusion Black Steel ATX Mid Tower Computer Case RetailIf that is not an option, I would recommend these :Installing a fan/fans in your case will not drop the temps that much unless your case has a front intake. You need fresh air comming in the front and exit'ing the rear to get optimal airflow.