[Learjeff]

Thanks, I'll have to check. I can't figure why it's not on their websites, or why my searches don't work. I can only find insulation for 1/2" and 3/4" pipes.

[Open_Truth]

You may have to actually go to those places, not look online. Also, you may not find 1" if that is what you are working with. In which case, you may need to use 3/4" or 1/2".

[SirKarnage]

And then collapsed for transport/storage: can get flatter if you invert the top neck, but then it doesnt hold the mask pole well.



Materials used:
All 1/2'' PVC bought from the big orange box store for home stuffs
3 @ 1/2'' x 2' lengths (was precut and easy)
6 @ T connectors
5 @ 45° connectors
2 @ 90° connectors
2 @ 1/2'' to 1'' T connector
Total without taxes = $12.82 your prices may vary

Now to wrap/paint it and add the foamy for the marker rests

[TechnaEtek3]

My Design

[seriouslysilly]

Hmm now considering making a 3-5 marker stand for the team. I want it to be as compact and foldable. Currently looking at designs out there that would be easy to duplicate.

[seriouslysilly]

Not finished yet. Just drew it up today and put it together.
Didn't even put the foam yet or cut the barrel slot in half.

[Open_Truth]

Looks good.

[feidler]

Originally Posted by seriouslysilly

Not finished yet. Just drew it up today and put it together.
Didn't even put the foam yet or cut the barrel slot in half.

I had a setup like this but with a Y piece to place the barrel on. You don't have to worry about scraping the barrel up or sticking it in the hole

[Dan0102]

This thread has my vote for a sticky, really cool info in here.

[Angelo_Here]

Nice stands

[bushhog750]

Fits in gear bag easily it's rubber coated on tank and barrel rest. Very sturdy.

[coop1985]

My new stand that holds 4. I was aiming for 5 but i did not have enough parts. I made this out of 3 old stands i had

[vesparider]

Here's one you haven't seen before. I don't have any markers with macro lines any longer. The team uses this in the pits.

[Japy]

That's a unique design. I kinda like it.

I may eventually build myself a 3-4 gun rack for when I go to events. My team always has a ton of backups chrono'd and ready to go.. but its always difficult locating them under the pile of stuff on the table.

[AresOphis]

Originally Posted by Banzaii

i wish paintball fields would just have a bunch of these stuck to the tables or whatever they have at the field

You could volunteer to make some and do it. I can think of several ways to make such an idea work.

[tonycon]

Made this one in about an hour for my team.

image-3373010324.jpg

[Nodent]

OK kids, I have seen allot of stands. some petty sophisticated and complex.

I made mine compact and wont tip when it gets top heavy with a full hopper.


IMG_20130331_214156 by Nodent, on Flickr


IMG_20130331_214207 by Nodent, on Flickr

NOTE the slit for the macro line from my old DM11


IMG_20130331_214247 by Nodent, on Flickr

[notorious01]

lol some of these are sweet

[JUGGERNAUT69]

Here's all the marker stand that I made for my teammates and some that I sold. The Height can be adjustable and foldable for easy storage. I used a clear coat spray to cover the sticker and the carbon fiber wrapping so it wont peel and it acts as a glue. Now I'm too lazy to make one lol















This the 1st marker stand that I did

[FlipChillson]

^^Nice, care to share the plans with us? I just made one yesterday, I'll post a pic after I paint it and whatnot.

[JUGGERNAUT69]

I used gorrilla glue, instead of the glue for pvc because it dry faster and I have better control. The carbon fiber wrapping and the reflective DEMON sticker I bought it from Advance Autoparts. I cut the sticker myself and spray painted it with clearcoat over it. Its the same clear coat spray that they use for cars. I bought it from Advance Autoparts. It acts as a glue to prevent the carbon wrapping and sticker from peeling. I used a bicycle tire interior to act as grip and protect the barrel and the tank from getting scratches. I dont really know all the measurement. I did freestyle evrything. I used a PVC cutter to cut the PVC its faster.