[utookmyname]

Im having an issue with my cyclone on my phenom. The paddles feed almost one half rotation with each trigger pull. I only use HPA, tried both air fittings...please help thanks. All I found on search was cyclone wont feed, which is a quite simple fix. Cant figure my issue out. Thanks

[tonycon]

Open up the bottom of the cyclone and check the ratchet...it could be cracked or the spindle could be stripped.

[utookmyname]

Just checked them. Ratchet in good shape and spindle not stripped! Any other ideas, would be greatly appreciated!

[RuleOfSines]

Originally Posted by utookmyname

Just checked them. Ratchet in good shape and spindle not stripped! Any other ideas, would be greatly appreciated!

There is only one way I can picture that happening, I'm going to take mine apart to see if it is what I suspect.

[RuleOfSines]

Hm, took mine apart and what I was picturing isn't possible

[utookmyname]

anyone else have any ideas?

[RuleOfSines]

Does it work properly when you manually ratchet it?

[utookmyname]

Yes, it works perfectly when I manually ratchet it...!

Originally Posted by RuleOfSines

Does it work properly when you manually ratchet it?

[tonycon]

Any possibility that the paddles are out of alignment with the spindle? It happened to me with ****ty paddles...