Crossover feedneck threads

Torn · 09-15-2012, 05:07 PM

Does anyone in here know what threads the crossover feedneck is? I bought one to mess around with and would like to replace the feedneck with a CCM one. Also does anyone make anything for these upgrade wise yet? like the R7 stuff

Rubbr Chickin · 09-16-2012, 01:56 AM

Not sure on the threads. Im guessing they would be industry standard, but dont quote me on that.

As for R7, what do you mean? The Greg Hastings cam? Should work on it.

Torn · 09-16-2012, 10:45 AM

By the R7 I mean the stiffi fore grip, I guess I will have to give tippman a call thanks for the info

Mispeld · 09-16-2012, 12:02 PM

Been looking since it came out, and so far have not seen nor heard of anyone doing upgrades for the Crossover yet. Well besides the R7 special edition, but even those are just for the 50 he had made.

Uber J · 09-24-2012, 01:34 PM

the threads for the Crossover are 7/8-20. there are many aftermarket feednecks with the same threads.

gijoe1254 · 09-24-2012, 01:37 PM

I use a dye Hyper 3 reg on mine and plug the threaded spot for a 90* elbow, then i just turn the reg all the way down. If you happen to have a reg you like as a foregrip too this is a great way to do it as well.

Eric@R7USA · 10-20-2012, 11:36 AM

Quote:

Originally Posted by Torn

Does anyone in here know what threads the crossover feedneck is? I bought one to mess around with and would like to replace the feedneck with a CCM one. Also does anyone make anything for these upgrade wise yet? like the R7 stuff

The threads are very close to the Dye Matrix. However if you are looking to attach the R7 product, simply remove the exterior collar.