[BELOWZERO]

figured id mention this now, if i were you i would pick up a shaft 4 boost kit and get it annoed too match as well

[im bad at pbx]

Originally Posted by BELOWZERO

figured id mention this now, if i were you i would pick up a shaft 4 boost kit and get it annoed too match as well

Obviously... Lol

[im bad at pbx]

Now funds are replenished, I'm looking for boost kits, CSL tips and bolts!!! Pooty's TechT PE anything

[Manny2]

Talking on your parts all in your favor, just waiting on you

[Manny2]

Texting on Csl parts Let me know so I cn ship

[Tec(ACB)]

take a look at the ne PE DART Bolt

which color do you wanno anno it?

[killajay2014]

He can't use a dart bolt in a sl94...only works for ego11 csl and ego-S

[Tec(ACB)]

the bolt works... but not the valve

[killajay2014]

"The Ego11 DART Kit is designed to be used only with the Ego11 platform (Includes CSL) and is only to be used as a complete kit"

[im bad at pbx]

Originally Posted by killajay2014

"The Ego11 DART Kit is designed to be used only with the Ego11 platform (Includes CSL) and is only to be used as a complete kit"

Correct me if I'm wrong but I'm pretty sure the value hasn't changed sense 06.

[killajay2014]

There needs to be a reason why planet eclipse said only with the ego11 platform...I would assume it has to do with the adjustable solenoid..But I might be wrong.

[CAOL_98]

Originally Posted by killajay2014

There needs to be a reason why planet eclipse said only with the ego11 platform...I would assume it has to do with the adjustable solenoid..But I might be wrong.

The Ego11 DART Kit is designed to be used only with the Ego11 platform (Includes CSL) and is only to be used as a complete kit. Installation and use of an incomplete kit will seriously affect the performance of the marker and in extreme cases may lead to damage of the marker. Only use the DART Valve Assembly and DART Bolt together in your EGO11 or CSL Marker.

[killajay2014]

Thank you for finishing the quote. But still doesn't explain why only the ego11 platform can use the system.

[im bad at pbx]

Originally Posted by killajay2014

Thank you for finishing the quote. But still doesn't explain why only the ego11 platform can use the system.

I think it's a publicly thing. So cure 4 bolts don't hit the tank in sales. That just my opinion. I will be buying the DART kit and I'm going to install it and give the world a final answer. If it doesn't work I'll try to mod it or get some on to mod it

[Tec(ACB)]

the Dart bolt is the same like pootys mods - so why should only the Dart bolt won't work?

The Bolt alone works... but not the valve!

[killajay2014]

Please read the description of what the dart bolt system is and what it consists of...there's a brass valve on the inside of the bolt which adds weight to smooth the egos shot...it has the extra O-ring on the back but far from a pooty bolt.

"Designed to improve every facet of the Ego11's feel and performance the DART kit increases efficiency and reduces sound signature and felt recoil as well being more gentle on paint in both the loading and the firing actions.

The DART kit enables the Ego11 to operate at consistently lower HPR and LPR pressures than has previously been possible on any Ego, but at the same time offers superior velocity consistency and efficiency.

So how did we achieve this?

DART Bolt - The Ego11 DART Bolt incorporates the latest Cure4 cushioned tip design as seen on the CSL. In addition to the Cure4 design there are now 2 seals on the body of the bolt, one either side of the transfer port. Rather than use the traditional method of stretched, incorrectly sized o-rings as the seals, the DART bolt utilizes a floating seal design. These floating seals match the internal bore of the breech to create a perfect seal, yet allow for thermal expansion and contraction of the bolt body to occur without worry of increasing frictional drag in the bolt system or loss of effective seal. The floating seals provide the optimum compromise between reliability and efficiency. They will operate with next-to-no lubrication in even the harshest conditions without any negative effects to efficiency or consistency.

Finally the new DART Bolt is fitted with a weighted insert. The small increase in mass that this insert brings to the bolt system enables the Ego11 to cycle with a lower LPR pressure at lower cyclic speeds yet still retain enough inertia to pop the exhaust valve open and overcome blowback forces during the firing phase.

DART Valve System - The Ego11 DART Valve Assembly combines an improved flow path with refined dynamics that result in significant gains in efficiency. The new design forces the valve to close off more quickly after opening, reducing air wastage after the ball has reached velocity.

The Ego11 DART Kit is designed to be used only with the Ego11 platform (Includes CSL) and is only to be used as a complete kit. Installation and use of an incomplete kit will seriously affect the performance of the marker and in extreme cases may lead to damage of the marker. Only use the DART Valve Assembly and DART Bolt together in your EGO11 or CSL Marker."

[pbkidminion]

Originally Posted by im bad at pbx

I think it's a publicly thing. So cure 4 bolts don't hit the tank in sales. That just my opinion. I will be buying the DART kit and I'm going to install it and give the world a final answer. If it doesn't work I'll try to mod it or get some on to mod it

Please do this! I'm wondering whether it will work
For 09's/10's. The valve between the 10 and 11 is compatible, and I'm pretty sure the 09 and 10 are the same. And bolts are universal, so its not like you'll have to mod it.

Post your results when you get them

[sh4d0vv]

If i were you, I WOULD NOT INSTALL THE DART KIT. It says ego 11's for a reason. They have the ajustable solenoid so it can tune the heavier bolt better. PE is afraid without the ajustable solenoid the extra weight will damage the bolt and marker. Just stick with the cure 4 or hush.

[killajay2014]

Originally Posted by XKE

Perhaps the controllable cycle speed of the 11 (via solenoid) makes it work with this kit. Could be that the older egos cycle too fast to be throwing this much weight around.

Originally Posted by Jack Wood

That is our concern, yes.

The mans word.

[im bad at pbx]

Originally Posted by killajay2014

The mans word.

SO Theoretically I could tune a ego11 noid in my geo3 or Ego11 then install it in my SL94?

[im bad at pbx]

Originally Posted by Manny2

Texting on Csl parts Let me know so I cn ship

I got money in the mail heading my way