Originally Posted by kpfau
So I have a 2009 PMR that shoots only one shot and then the bolt does not reset. I turn the gun on, gas it up, shoot once, and then there are only small puffs of air from the noid area. I have checked over all the electronics, (board, battery) and the whole bolt assembly, and they are fine. It appears that the air flow to return the bolt to its initial position is not working. Do you think this is a problem with the solenoid? My friend suggested adjusting the dwell. Please let me know.
make sure the dwell is set to stock. also relube you bolt. it sounds like bolt stick.