[Fil for the kill]

i was trying to get the rammer out of my gun (graphite nexus ego) and instead of rotating it to loosen it i tightened it and now it fell in the gun! what now??

[gamer565]

You tighten what?

You have to remove the ram cap before you can access the ram.

Might try posting in the correct section for more/better help:
http://www.pbnation.com/forumdisplay.php?f=126

[Fil for the kill]

Originally Posted by gamer565

You tighten what?

You have to remove the ram cap before you can access the ram.

idk what i was doing on the back of the ego where on the side it says nexus i was trying to loosen a bolt. a think a rammer/ram cap watever it was i accidently tightened it and it fell ito the hole and wont come out.. idfk wat happened

[ttimberlak443]

Pictures will help. From what I can get out of this, you tightened the rammer cap so tight that it stripped the body of the marker and fell into the gun. Yes? No? Maybe?

[eggwhite6]

wait. you took the bolt out then the ram cap and the rammer fell in your gun? you should just be able to stick an allen down and push it out the back. post pictures like he said. ask a tech on here or on ego forums

[gamer565]

Originally Posted by Fil for the kill

idk what i was doing on the back of the ego where on the side it says nexus i was trying to loosen a bolt. a think a rammer/ram cap watever it was i accidently tightened it and it fell ito the hole and wont come out.. idfk wat happened

Post pictures of what you were trying to tighten.


If the marker is working fine, don't touch anything just leave it and go play. You need to read the manual since it seems you have no clue at on what your ever trying to understand..