Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-11-2012, 08:15 AM #1
Wabbit23
 
 
Wabbit23's Avatar
 
Join Date: Dec 2011
Location: On the Paintball Field
Wabbit23 owns a Planet Eclipse Ego
Wabbit23 is for the Gunfight
Wabbit23 has achieved Level 2 in PbNation Pursuit
Wabbit23 supports DLX Technology
luxe help

Ok I need some help I just recently got a luxe in on a trade and shoots amazing! Just got back from a msxl event and during the event itstarted leaking when I got home I decided to service it so it would stop leaking. Well I have not got it to stop leaking it is coming from the trigger right behind it so it sounds like a solinoid leak. I have changed out every oring in the gun including the solinoid orings every oring on the reg every oring on the bolt and guide and can also have tried a different bolt. My ft screw is all the way in and manifold screw 2 turns in from flush. Now it shoots just fine shoots ropes and stays at a consistent fps it just leaks now on occasion it will stop by itself and will stop when shooting????? Any one can you help me anything if you got dlx tech number I can call to see if I can send ot to them to fix or what it may be because I am out of ideas thanks
Wabbit23 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-11-2012, 08:16 AM #2
Wabbit23
 
 
Wabbit23's Avatar
 
Join Date: Dec 2011
Location: On the Paintball Field
Wabbit23 owns a Planet Eclipse Ego
Wabbit23 is for the Gunfight
Wabbit23 has achieved Level 2 in PbNation Pursuit
Wabbit23 supports DLX Technology
The leak will stop when shooting. Is it solinoid
Wabbit23 is offline   Reply With Quote
Old 09-11-2012, 09:29 AM #3
phillysteve
Theft Patrol
 
phillysteve's Avatar
 
Join Date: Aug 2008
Location: Philly
Annual Supporting Member
phillysteve is Legendary
phillysteve is a Forum Captain
Swap the regulator with the regulator off another marker and see if the leak stops when you air it up that time. If it does then you're suffering from regulator creep which causes the solenoid to vent due to the over-pressurizing.

I've had this issue before and it is extremely common. Most likely your regulator will need service. The reg seat may need replacing.
__________________
Phillysteve's guide to track down anyone: _CLICK_
LVP SOUTH, Hatfield, PA
DLX Luxe
GLOCK 19
phillysteve is offline   Reply With Quote
Old 09-11-2012, 04:41 PM #4
mxpbplayerdm12
 
 
mxpbplayerdm12's Avatar
 
Join Date: Jun 2012
mxpbplayerdm12 has achieved Level 1 in PbNation Pursuit
mxpbplayerdm12 has achieved Level 2 in PbNation Pursuit
mxpbplayerdm12 supports DLX Technology
Is the back cap there is 2 small o rings in the pin that secures the back cap on place refer to manual on advance maintenance page 6 I the degassing valve core pin replace those 2 small o rings that should fix it
__________________
Jesus swag!!!
mxpbplayerdm12 is offline   Reply With Quote
Old 09-11-2012, 08:22 PM #5
Wabbit23
 
 
Wabbit23's Avatar
 
Join Date: Dec 2011
Location: On the Paintball Field
Wabbit23 owns a Planet Eclipse Ego
Wabbit23 is for the Gunfight
Wabbit23 has achieved Level 2 in PbNation Pursuit
Wabbit23 supports DLX Technology
I will try those two things you guys mentioned and let you know thanks for the advice
Wabbit23 is offline   Reply With Quote
Old 09-11-2012, 09:16 PM #6
Wabbit23
 
 
Wabbit23's Avatar
 
Join Date: Dec 2011
Location: On the Paintball Field
Wabbit23 owns a Planet Eclipse Ego
Wabbit23 is for the Gunfight
Wabbit23 has achieved Level 2 in PbNation Pursuit
Wabbit23 supports DLX Technology
Mxpbplayerdm12 oring got changed but didn't fix my problem will have to wait till Sunday to try the reg to my buddies luxe see if that is it
Wabbit23 is offline   Reply With Quote
Old 09-13-2012, 12:07 PM #7
Heafis123
The Hartley bros INC.
 
Heafis123's Avatar
 
Join Date: May 2011
Location: Connecticut, southside
Heafis123 owns a Planet Eclipse Geo
Heafis123 owns a Planet Eclipse Ego
Heafis123 is for the Gunfight
Heafis123 supports DLX Technology
your regulator may be set to high cuz if it it is then solenoid will purge to prevent it from over pressurizing
__________________
Signatures are for chumps
Heafis123 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump