[TcsTuba]

I want a good barrel that fits nicely on a TechT iFit kit. The iFit adds 1 3/4" (basically 2") to the barrel, so keep in mind it needs to be available in 12" and 14". I just can't figure out which barrel to put on it. It needs porting, needs to be light, and needs to be relatively cheap. The largest bore I ever use is a .685, so maybe a .685 barrel?

[TcsTuba]

Anybody?

[Lawpass]

I've had better luck with sizers when I go a little bigger between the bore of the sizer and the barrel, I'd say .687 to .689 if you are going to use the .685 sizer. and I always like the j&j one piece barrels because of the porting and cleaning, the 14" is really 13.5" if it helps. But really one of the neat things about the techt is that you can use just about anything on it with good results.

[TcsTuba]

Originally Posted by Lawpass

I've had better luck with sizers when I go a little bigger between the bore of the sizer and the barrel, I'd say .687 to .689 if you are going to use the .685 sizer. and I always like the j&j one piece barrels because of the porting and cleaning, the 14" is really 13.5" if it helps. But really one of the neat things about the techt is that you can use just about anything on it with good results.

Right. I agree. Thanks for the help, it's greatly appreciated.

[Evil Rocky]

I use a Stiffi with mine. My stiffi is a .685 and I use a .680 with my Python/TechT kit (Identically the same)