[cruz-gsr]

Originally Posted by georgek

it just needs to play with your settings a bit and figure out what works best with your marker!!!

Just like he said, u have to play around until u get u get it perfect, every gun is different

[awwjeezitscrazy]

what size orings do you use for the "spacer" orings?

wil 014 or 015 work?

[cybermaniac15]

Nvm.

[andcable]

O'ring size is 18 for any reference.

[awwjeezitscrazy]

installed an eigenring in a m6 and a dm6, both shoot smoother. Both markers resonate differently now, and i DIG IT :: going to give it the field test this weekend!

[**Entropy**]

Originally Posted by Lurker27

Dm12 proto is incoming, tester will have it as early as this week, already got a quote on it from my short-run machinist so as soon as we're good it will get ordered.

DM12 geometry may actually be the best of the bunch

LMK where you stand with this, im anxious to give one a try

[awwjeezitscrazy]

Olive M6
LPR: 3 1/2 Turns Out
Dwell: Hater Board set to 13 Dwell
Hpr: Set to shoot 280's

very smooth.

[FrmrSpecialist]

Originally Posted by **Entropy**

LMK where you stand with this, im anxious to give one a try

Hehehe

[MaSsAcRe251]

So, what's the status of the DM12 ring? Or did I miss the release?

[georgek]

hey Lurker, what is the size of the o-ring that holds the sleeve on the top hat, the one that is inside of the sleeve for the DM10?? cause I cut mine and I need a new one..

[Lurker27]

It's a metric o-ring - 18MM x 1MM. I have a ton, I'll send you some if you PM me your address.

[georgek]

Hello Lurker..
Thanks for the quick reply!!
pming!!!

[georgek]

received them buddy!!! thank you very much!!!
I am getting some very good numbers on efficiency!!!
As soon as I get the time I will make a review and a setup guide!!
Damn , your products rock!!!!!

[ProtoSkillz]

Thought I had it installed correctly but after going through this thread im more confused.

It's on a DMC. Do the three o-rings on the top hat need to be lubed?

And what about the O-ring on the Eigenring? Remove to lube and put it back on or remove and replace with Lube? Also what direction should it be facing?

[paperchasin]

Anyone using this on their DM11?? Would love to hear some reviews.

[ikappedkermit]

^^ I've been running this on my DM11 since Jan/Feb... the DM11 is super smooth to begin with, so I did not sense much difference in recoil, but from an efficiency standpoint I believe I did have a significant increase over stock. That, unfortunately, is very hard to quantify due to the fact that my DM was essentially brand new and by now is very broken in...
As a back player, carrying 5 pods, I do not worry at all about not having enough air in my 68-4500, to play a complete point and be running out of paint by games end (maybe I shouldn't anyway, but I still am pleased.)

[paperchasin]

Originally Posted by ikappedkermit

^^ I've been running this on my DM11 since Jan/Feb... the DM11 is super smooth to begin with, so I did not sense much difference in recoil, but from an efficiency standpoint I believe I did have a significant increase over stock. That, unfortunately, is very hard to quantify due to the fact that my DM was essentially brand new and by now is very broken in...
As a back player, carrying 5 pods, I do not worry at all about not having enough air in my 68-4500, to play a complete point and be running out of paint by games end (maybe I shouldn't anyway, but I still am pleased.)

Thanks for the feedback. I was hoping to get about 5-6 pods off of a 50/45 Ninja tank. Mine is bone stock right now. Will I need the Eigenring?

[bigd11287]

For the best efficiency you can go with a bwing bolt and the eigenring. Lower dwell is the key to better efficiency and that is what the eigenring helps with!

[cybermaniac15]

Still the best upgrade around.

[lucidvtec]

they make this for the dm12???

[CrazyHarry]

Originally Posted by lucidvtec

they make this for the dm12???

No.