I just picked up a new to me CCM T2 off craigslist. Its been well used and it shoots great, just a very uncomfortable trigger pull. It fires as normal, but I really have to pull the **** out of the trigger and it makes it VERY uncomfortable to shoot. It nearly hurts my finger. I CCM'd a prostock with a 45 frame, and its got the best trigger pull Ive ever felt. I was just wondering if there is an external adjustment on the sear or something or do I need to start taking it apart, and where do I start. Id really not like to screw this up. Help? I'll post a video as soon as I can.
Last edited by accidentprone : 09-10-2012 at 10:42 PM.
the auto trigger is the lever on the left side of the marker, but i just remembered that the T2 has a sloid lever and only fits on one way.
You might need to adjust the sear which is done through the top of the hammer. google timing an autotriger or search on you tube
__________________
Rockin' Cocks
RC Revs
EXALT, Stiffi, The Lifestyle Clothing, PEVS, MCB
Save the Environment, PLAY PUMP!
the auto trigger is the lever on the left side of the marker, but i just remembered that the T2 has a sloid lever and only fits on one way.
You might need to adjust the sear which is done through the top of the hammer. google timing an autotriger or search on you tube
Sear adjustment I can do no big deal. I'll give it a shot.
It's actually "hammer lug adjustment", but maybe we're all on the same page.
Does it shoot when holding the trigger and jamming the handle forward? If so, that's definitely a timing issue.
__________________ Certified Master Airsmith
Airsmithing & 3rd Party Shipping - PM for details Can't we all just play Paintball?
It's actually "hammer lug adjustment", but maybe we're all on the same page.
Does it shoot when holding the trigger and jamming the handle forward? If so, that's definitely a timing issue.
Im not totally sure what you define jamming to be, but it autotriggers properly as far as I know, and it fires in a normal pump pull pump pull method as well.
Righto. Good luck with your timing, let us know how it goes.
Done deal! And damn. I am amazed. Astonished. Im considering removing the Rat internals out of my superstock pump and going all CCM. Its the smoothest cocker based pump Ive ever shot. Woah. Well done CCM.
Yeah I bought this for the GF to use because the Snipers farty noises drove me nuts. That will now be the loaner, this will be hers, and I want one too. Just a quick question again, the macro fitting is in a difficult spot on this. Theres no way to swivel it to be in line with the gripframe is there?
Oh, well you could just unscrew it slightly so it sits where you want. The line will keep it in place between play days, and when aired up it will "stick" in place. I think that's what I did on mine, anyway.
__________________ Certified Master Airsmith
Airsmithing & 3rd Party Shipping - PM for details Can't we all just play Paintball?
Oh, well you could just unscrew it slightly so it sits where you want. The line will keep it in place between play days, and when aired up it will "stick" in place. I think that's what I did on mine, anyway.
Makes sense. Thanks for all your help tonight man.
Remove the macroline and the regulator. Put an oring on around the male part of the regulator and screw it back on so that the macroline fitting lines up where you want it. When you air the gun up the pressure will keep the regulator from spinning and the oring should keep it from leaking.
