Originally Posted by thunderstruckdc2005
V1= initial release
V2= shark fin on the arm
V3= V2 + velcro straps on batteries
the rotor will pretty much only shoot what's in the stack and then won't feed. I looked on dye's rotor forums and there was a thread about my problem. according to the dye tech, the board isn't supplying enough power to the motor to get it to feed. don't know if that's my problem or if my motor is starting to burn out.
Actually you have that backwards:
V1 = Release
V2 = Battery Velcro
V3 = "Shark Fin" on the arm + Battery Velcro
I doubt its the motor, they motors in the Rotors are quite good, and really havent even been out all that long for this problem to start happening, all though there is the off chance you have a defective one. Now the power problem as you mentioned sounds likely. I would check the power wire, and see if its pinched or damaged. If so you might just need a new battery pack which I imagine is super cheap. Though to be honest the first thing I would do is call Dye, and see what they can do for you.
If you do have to replace the board and cant get a stock board for under 20 bucks, I would check out some of the upgrade kits out there. I think the only decent one still in production is the Virtue board (7th Element has some "strings" attached to its features).
Why do people do this wanna-be hk thing? I mean hk people dont even play paintball, they just whine and start drama while wearing the ugliest stuff. Seriously you find light blue and pink to be attractive colors for your parents 1500 dollar investment (your gun/marker)? If you want to whine keep it off the field and save it for the internet; O wait! THATS EXACTLY WHAT YOU DO! Haha, if you don't play then don't whine.
I want your G6r parts and upgrades, sell them to me, because you wont get anything for them if you sell/trade them with the gun.