 |
05-18-2008, 12:05 PM
|
#1
|
|
Join Date: Jul 2007
Location: Michigan
|
Mokal Aura on CO2?
Will the Mokal Aura be ruined with CO2? It is impossible for me to get a HPA tank filled up in my area.
|
|
|
05-22-2008, 10:26 PM
|
#2
|
|
OneLoveOneLifeOneChance
Join Date: Jul 2007
Location: 914-SoNY
|
I'm pretty sure you would have to use anti-siphon c02, but even then, I'd stick with HPA, no matter how hard it is.
__________________
"Break me down, I'll rise back up"
flickr
|
|
|
06-08-2008, 10:02 AM
|
#3
|
|
No Charge For Awesomeness
Join Date: Jul 2005
Location: Your mom's house
|
Sear tripping blow-back markers (Aura) were made for CO2. No it will not ruin it. Yes, an anti-siphon tank should be a priority to reduce the liquid co2 into the marker.
CO2 is not a disease, you kids act like its the plague and it's funny.
|
|
|
06-08-2008, 02:14 PM
|
#4
|
|
Join Date: May 2007
Location: in a giant bucket
|
I would put a palmer on it if you can afford one, other than that will be fine, I would rather have a spyder RS for co2 use.
|
|
|
06-15-2008, 09:20 PM
|
#5
|
|
|
yah
|
|
|
06-17-2008, 12:48 PM
|
#6
|
|
Join Date: Apr 2008
Location: Missouri
|
It can run on co2 but it would be best if u used nitrogen
|
|
|
09-02-2012, 04:26 PM
|
#7
|
|
|
sweet i was wondering the same i dont know about theses guns and my daughter wants to get in to it so its good to know i can just swing down to walmart and get her co2 for it
|
|
|
09-02-2012, 11:49 PM
|
#8
|
|
Join Date: Oct 2011
Location: State of Confusion
|
an anti-siphon tube in the co2 tank and running a bottomline Stabilizer, or a vert Stab(sorry, unfamiliar with the gun) will keep any co2 out of the gun.
the one problem that people fail to understand about co2 is that any gun can shoot it as a gas. its when the liquid gets either to the noid and starts to expand and freeze inside the noid, or the orings on the gun aren't used to the temperature variances of co2.
you can run co2 on any gun. a gas is a gas is a gas. HPA(whether compressed air or pure nitrogen) is far easier to use, no doubt about that. HPA isn't effected by temp, and its already regged, so its plug and play. but if you take the time to understand how co2 works, it is better than HPA. you can get far more shots per cubic inch from co2 than HPA. i have a cocker that gets 1300-1500 shots off a 12oz co2 tank, where as a 68/4500 about 1100+. which tank is smaller and easier to weld?
|
|
|
09-03-2012, 11:19 AM
|
#9
|
|
Blue Thunder
Join Date: Jun 2012
Location: Fountain , Colorado
|
IMO: I would never use Co2 on any gun its not good for it and can ruin high end markers and even low or mid.Mokal is a mid end marker and should not be used with Co2.Find a Fire station,Scuba shop,Welding shop with a Air Compressor or N2.Like others have stated use a Anti-Siphon even then I still would not do that.
Flip Side : Co2 is not good for a marker.Your the idiot saying people compare it to a disease. I would never take your opinion. Co2 is a gas yes BUT its not a good gas. Sure you can use it but your more than likely not to have mokal for long.
__________________
↓Setup↓ P.E Etek 2 Marker w/OLED Dye v3 Rotor 56/45 Empire Ultra Light Tank ☢Indianapolis Mutiny ☢New England Hurricane☢ Portland Uprising ☢
Dorito Player | Blue Thunder
|
|
|
09-03-2012, 01:49 PM
|
#10
|
|
SWIZZIN 24/7 365 *****ES
Join Date: Jul 2012
Location: Spotting Trains
|
idiots necroing threads
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|