[jimcrimsfactory4life]

How do you remove the CP flow plug from a DM6?

[grss429]

Originally Posted by jimcrimsfactory4life

How do you remove the CP flow plug from a DM6?

pull your grip frame off, and remove the front grip frame screw, and then there is a small set screw, remove it and then just pull the flow plug out

[jimcrimsfactory4life]

ok thanks what do i pull it out with?

[wdp4life7]

If you can't find anything to pull the plug out with, you can also remove the solenoid then push the plug out with an allen wrench.

[grss429]

Originally Posted by wdp4life7

If you can't find anything to pull the plug out with, you can also remove the solenoid then push the plug out with an allen wrench.

this works also.. you can pull it out gentely with pilers, once the set screw is out it should just be free floating in there and should be able to even wiggle it out

[eyeownyu]

you dont need to remove the noid to push it out. just stick an allen wrench down there and you can push it.