Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 08-21-2012, 01:28 PM #1
Bduck8's Avatar
Join Date: Jun 2012
07 PMR solenoid

Have a leak from my solenoid on my 07 PMR. I've tried replacing the gasket that seals the solenoid but no luck. I'm looking to buy an 07 solenoid. Let me know if you can be of help.
Bduck8 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 08-22-2012, 02:13 PM #2
Punisher068's Avatar
Join Date: Apr 2012
Location: Santa Cruz Mountains
heres my thread on this problem,its fairly common,to my knowledge solenoids dont go out tooo often as there is a pressure relief funtion so you cant overpressiurize it
seeems to be holding up good since I modded it,mine is a 07
ballin' since '95
Marauders Paintball
Ion w\Axe Relay
Our teams home field PBN thread
Punisher068 is offline   Reply With Quote
Old 08-22-2012, 03:19 PM #3
Herbal Cultivar M.D.
kwik's Avatar
Join Date: Sep 2004
Location: Phoenix, AZ
kwik is a Supporting Member
 has been a member for 10 years
kwik supports Team VICIOUS
kwik supports Pev's Paintball
kwik is Legendary
kwik supports Empire
I have to ask if you have check the basic items first?

Zero'd out the HPR and raised the pressure slowly until it is cycling, does it still leak?

I assume your 100% sure it is coming from the noid? there are certain other areas that can leak that can sound like it is coming from the noid.

Then check the link posted above.

"The Harder the World, The Fiercer the Honor."

kwik is offline   Reply With Quote
Old 08-22-2012, 05:48 PM #4
Bduck8's Avatar
Join Date: Jun 2012
Yes, I replaced all the O rings along with the gasket and did a pressure test. I also had my local shop tech take a look and he said a solenoid was the issue. But I'll def give the thread a looks and try to fix it. Thanks for the help guys
Bduck8 is offline   Reply With Quote
Old 09-22-2015, 07:30 PM #5
juit's Avatar
Join Date: May 2008
Location: mission
juit supports Team VICIOUS
juit is for the Gunfight
juit posts videos on PbNation
juit has achieved Level 2 in PbNation Pursuit
juit has perfected Level 2 in PbNation Pursuit
sorry to necro this but Im just fixed mine with gasket paper worked for me awesome

for me the permatex didnt worked

I greased the gasket and then put it on top of the paper gasket

drilled all holes

the only thing I had to do is sand the trigger because it was hitting the noid

thanks for the guy who took the time to make this thread

Last edited by juit : 09-24-2015 at 12:18 PM.
juit is offline   Reply With Quote
Old 09-24-2015, 11:21 AM #6
Join Date: Aug 2015
You could always just pocket the solenoid face for actual orings.. Or the body if you didn't have faith in your abilities
TheSentry is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump