Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 08-14-2012, 09:17 PM #1
superbife
 
 
superbife's Avatar
 
Join Date: Aug 2012
Help with Luxe 1.5



The "puffing" sound is in the top of the grip, the bolt moves but donīt shoot. PLEASE HELP!!!
DWELL: 14
FSDO: 0
superbife is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-15-2012, 03:34 PM #2
X A N A T 0 S
Travis Dixon
 
X A N A T 0 S's Avatar
 
Join Date: May 2009
Location: 810 So Mich
Annual Supporting Member
X A N A T 0 S plays in the PSP
X A N A T 0 S plays in the APPA D1 division
Make sure you check through your orings internally, front can, back cap and rear can, bolt sail, bolt guide, what bolt is in it?
Information would help your case tremendously.
__________________
Chicago Distortion 1st Place CHI'14
-Cru Paintball-

Like New Guns Sale! Custom Vanquishes! Rare G6rs, VX Clones, DARK EDITION Ego
X A N A T 0 S is offline   Reply With Quote
Old 08-15-2012, 04:15 PM #3
krazynuttz23
 
 
krazynuttz23's Avatar
 
Join Date: Nov 2008
I think it's an oring issue. Try relubing your bolt and see if that helps.
krazynuttz23 is offline   Reply With Quote
Old 08-15-2012, 05:16 PM #4
Ragin Cajun
CLICK, CLICK, BOOM
 
Ragin Cajun's Avatar
 
Join Date: Dec 2001
Location: South Louisiana
Annual Supporting Member
Ragin Cajun is a founding member
Ragin Cajun is one of the top 1000 posters on PbNation
Ragin Cajun is a Forum Captain
Change the oring inside of the back cap. Raise the dwell to 18 and the fsdo timer to 16 and see if it shoots then.
Ragin Cajun is offline   Reply With Quote
Old 08-16-2012, 10:55 AM #5
Keith@DLX
Keith@DXL
 
Keith@DLX's Avatar
 
Join Date: Aug 2012
Location: Latrobe, Pa
Keith@DLX works for a Paintball manufacturer
Do you have buna o-rings? If so, try installing urethane. Buna increases the friction and can swell. Also, you should only use DOW 33 grease. Every other grease that we have tested will cause the o-rings to swell. If installing the proper o-rings and using the correct grease does not help, try raising the first shot drop setting to 15ms and lowering the FSDO timer.
Keith@DLX is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump