New quest owner: problems
Just picked up a quest with Was board. So far it's slow, loud, and has decent kick like a SP vibe/ gog envy. The speed is maybe 12 bps in semi with the trigger set up and almost bouncing. I have a DM6 that shoots waaay faster in semi using the same reloader B and my same retarded fingers. I have read all the stickeys, and the first 15 pages of this FEP forum.
Bonus problem: PSP setting shoots weird like the bolt doesn't go back far enough to let paint in. So I get 2 shots of paint then a triple dry fire.
I replaced all the o-rings on the Stock silver bolt, pin, and breach, lubed with slick honey.
Lubed the LPR piston and performed the LPR cap mod
Replaced HPR with Hyper 2 and replaced all o-rings and lubed.
LPR: 95PSI (high I know but I was trying to dial this thing in. I will try not looking at the gauge and set it up like I do my DM6 next.
Was board settings:
Dwell: 12 (again high, but shots were not consistent even with this dwell)
Debounce: 8 (felt a touch of bounce but not uncontrolled)
Eye mode: 2 was slightly faster than 3
Bip delay: 2
ROF cap: 23
eye power: 11
I have no leaks, consistency is 309-254 slightly overbored barrel fit. Same paint, same barrel the DM6 is +/- 10. I was really hoping for a quiet fast shooter with better efficiency than my 6. I'll spend a day playing trying to sweet spot those regs, but if not it's headed for a BST.