 |
08-08-2012, 06:51 PM
|
#1
|
|
Join Date: Jun 2008
Location: California
|
11/16 valve options
So I've got a Warped Sportz Z-force pump. When I air it up after cocking it, a profuse leak comes from the barrel/breach. After doing some research, I have found that this happens because of either a bad cup seal, valve or valve o-rings. I tried to swap the valve o-rings, I sanded the cup seal with fine grit sand paper, turned up the input pressure, and backed out the ivg, but nothing has worked.
SO I am going to try and get an entirely new valve and cup seal. I have heard good things about the maddman rocket valves and pb gateway has trilogy/SR valves and cup seals for around the same price. What should I do? Are there other 11/16 valves out there that will work?
Thanks for the help!!
__________________
NorCal Nuggets!
|
|
|
|
08-14-2012, 02:49 AM
|
#2
|
|
HATERS GON HATE
Join Date: Mar 2008
Location: Clayton, NJ
|
Isn't the valve in a CCM ss25 that size? Call CCM and ask them.
|
|
|
|
|
08-15-2012, 12:24 AM
|
#3
|
|
All You need is 1 ball
Join Date: Oct 2009
Location: USA
|
try a spyder valve.
not joking.
__________________
I play for fun
Last edited by §TOCKCLA§§ : 08-15-2012 at 12:29 AM.
|
|
|
|
|
08-15-2012, 07:54 AM
|
#4
|
|
Yep, it's orange.
Join Date: Aug 2003
Location: New Richmond, WI
|
On spyder valves you have the blowback slots/ports to deal with.
Palmer's makes some good Trilogy 11/16 valves, optimized for different pressure ranges.
The valve from a Viking/Excaliber is also 11/16, and you can get the valves still from AKA. Bit pricey though.
__________________
David Johnson, AKA Fubarius.
000110 200 11202 10 000020
012211 021 22110 22 121101
222001 222 10220 00 022212
|
|
|
|
|
08-15-2012, 08:20 AM
|
#5
|
|
RC ARMY
Join Date: Nov 2001
Location: **703**
|
Before jumping to valve conclusions, have you tried rasing your reg pressure or increasing the valve spring stiffness?
If you are going to replace it palmers might be the best way to go.
__________________
Rockin' Cocks
RC Revs
EXALT, Stiffi, The Lifestyle Clothing, PEVS, MCB
Save the Environment, PLAY PUMP!
|
|
|
|
|
08-16-2012, 05:03 PM
|
#6
|
|
Join Date: Jun 2008
Location: California
|
I have my sidewinder unscrewed almost all the way and the leak persists. I got a palmers 11/16 valve, red spyder velocity spring in place of my valve spring and a green madman spring. Any other tips on stopping this leak?
__________________
NorCal Nuggets!
|
|
|
|
|
08-16-2012, 06:10 PM
|
#7
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
get a CCM SS-25 lower tube kit and sweetspot your reg.
|
|
|
|
|
08-20-2012, 09:56 AM
|
#8
|
|
Fiend
Join Date: Mar 2007
Location: Boston
|
Try a more petroleum compound lube like dow 55 on your valve orings. I have seen older markers get grooves worn in where the valve orings are. I have used fatter orings and dow55 with varying results. Good luck.
__________________
"I am disillusioned enough to know that no man's opinion on any subject is worth a damn unless backed up with enough genuine information to make him really know what he's talking about."
H. P. Lovecraft
|
|
|
|
|
08-20-2012, 03:44 PM
|
#9
|
|
Join Date: Jun 2008
Location: California
|
I use hater sauce. What size/material O-rings should I get?
__________________
NorCal Nuggets!
|
|
|
|
|
08-21-2012, 09:46 PM
|
#10
|
|
D3 to D4 in 2.0 years
Join Date: Feb 2006
Location: Atlanta, GA
|
The piranha GTI valve is 11/16 but your valve pin might not be the same Diameter.
|
|
|
|
|
08-24-2012, 07:10 PM
|
#11
|
|
Join Date: Jun 2008
Location: California
|
Don't know how or why, but the ccm ss-25 valve fixed it right up!
__________________
NorCal Nuggets!
|
|
|
|
|
08-24-2012, 07:14 PM
|
#12
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
Quote:
Originally Posted by Master_x
Don't know how or why, but the ccm ss-25 valve fixed it right up!
|
 |
|
|
|
|
08-25-2012, 12:56 AM
|
#13
|
|
|
Valve
CCM for the win...... you can never go wrong.
__________________
Never argue with an idiot. They drag you down to their level, then beat you with experience.
|
|
|
|
|
08-25-2012, 08:58 AM
|
#14
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
****ing true.
|
|
|
|
|
08-25-2012, 04:20 PM
|
#15
|
|
Join Date: Jun 2008
Location: California
|
some eye candy for you guys! Thanks for the help!
__________________
NorCal Nuggets!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
