got a luxe off of someone and the board didn't work with charging batteries so he bought one off of someone and had it sent to me. I get the board but it's acting like the eyes are dirty only shooting 10 bps with eyes on, and normal psp 12.5 when the eyes are off. I don't think its a problem with the eyes because when I have the other board in the eyes work perfectly fine, the battery just doesn't charge. Does anyone have any suggestions of something I should do? Kind of new to the luxe so don't really know as much yet. Thank you!
First of all, next time you have issues do a little more research instead of posting a whole nother thread. Second of all, if that's the case you need to try a different board, the board may be what's shorting out the eyes. First, check for debris in front of the eye ports, check the eyes for rips, tears and that they're plugged in.
__________________ Chicago Distortion 1st Place CHI'14!!
who cares if I make another thread, its a forum..I did research and explored different possibilities already and it wasn't any of them so I just was asking for help. Already took the eyes completely out cleaned them. When I have the board in that doesn't charge the eyes work completely fine, but when I have the other board in that charges its acting like the eyes are dirty being stuck at 10 bps.
You guys did read the part where he said he has two separate boards and the eyes work fine in one and not the other right? lol. A lot of these posts make me think you did not read the entire post or comprehend it.
It sounds to me like your first board obviously has a broken charging port.
It sounds to me like your second board has a broken eye port OR need to be reset to factory settings.
If you bought the marker from someone and he sent you two broken boards its safe to say you may want to proceed in getting your money back.
The person you bought the luxe off of can proceed in getting his money back for the second board he bought that has a broken eye port.
Yeah the first board definitely has a broken charging port. I'm going to pick up a new luxe eye flex strip and see if that works. It has to be that because I just tried a brand new 2.0 board and it's doing the same thing. I just don't get why when I have the original 1.0 board with the broken charging port in that the eyes work..
If the eyes are bad and reading as if they are blocked, turning the bypass BPS to 12 bps is only masking the problem. It may seem to work correctly but when you get to the end of your loader or it jams, you risk chopping paint. The bypass BPS is lower than the stock fire rate to avoid that and also allow you to keep playing if they go down in the middle of a point. I recommend sending both boards in to us and we will try to repair at least one of them for a minimal charge.