I have a little leak in the marker!

Ghostwarlock12 · 10-18-2009, 06:40 PM

the Marker is my homies marker. I checked it for him and one of the solinoids was loose so it was leakinig like crazy. I check the marker and I tightend it back up. it is shooting fine but it has just a small leak through the back of the marker. (well thats where the sound is coming from) does anyone know what the problem could be. its all stock only 2 upgrades Magnetic detents and techt L7 bolt, other than that its just stock. PVT me or just post it up here.

Zepulkinator · 10-18-2009, 10:05 PM

O-ring on the backcap is my guess.

Ghostwarlock12 · 10-19-2009, 07:19 AM

well to be honest with you this is the 1st time that I check out the gun. it was brand new when my homie bought it so I really don't know much about it. where would that O-ring be?

pbkyle65 · 11-16-2009, 07:32 AM

could be your tank o-ring, your hose might need to be tightned, or you might have a crack in your asa (which just happened to my vibe)

Zepulkinator · 11-16-2009, 11:56 AM

I'd suggest buying this, or even more than 1:

http://paintballgateway.com/smpaionsp8ok.html

The o-rings will fit your Vibe.

Here is a cheaper on that is for the EOS, which is basically a really supped up Vibe. It's only a dollar for these kits:

http://paintballgateway.com/smpaepsekit.html

Ghostwarlock12 · 07-30-2012, 11:21 AM

Quote:

Originally Posted by Zepulkinator

O-ring on the backcap is my guess.

back cap where the doughnut is?

Ghostwarlock12 · 07-30-2012, 11:23 AM

Quote:

Originally Posted by pbkyle65

could be your tank o-ring, your hose might need to be tightned, or you might have a crack in your asa (which just happened to my vibe)

I dont think its the tank O-ring I looked at it today and it looks fine. but I might just change it just in case. but I highly doubt that's it.

paintballcrazy94 · 07-31-2012, 03:21 AM

your gonna want to trouble shoot all possible areas where a leak could occur --

change your tank o ring

change all Bolt Orings

And its probably the back cap, which is the cap you screw off at the back to get at the bolt, there is a big black oring there change that one

if you need a good oring kit order one from oringmonkey.com

Ghostwarlock12 · 08-01-2012, 02:32 AM

So I did pretty much everything everyone is telling me to do and I still got the leak. I check the hoses to see of they are pinched abbr nothing. It I don't know of either I have the gas on low or what but I checked that too anne still nothing seems as if when I tighten the screws to the body that the leak starts but I don't understand why. Could out have to do with the reg?

Dedloc · 08-01-2012, 07:43 AM

OK, so you need to check the orings on the banjos as well. I would leave the trigger frame off the marker and attach your tank to the asa while it is off so you can get a better idea of where the leak is coming from.

Ghostwarlock12 · 08-01-2012, 08:53 AM

I did that it's abs it gassed up fine no problem no leak nothing. Only when the frame is on it

paintballcrazy94 · 08-02-2012, 02:48 AM

must be pinching something i dont know? im kinda lost on what else to do here..

shocktroop · 08-05-2012, 05:08 PM

If it only leaks when you tighten everything up, check if it's the hose that goes from the top noid cap to the fitting. It's only like an inch long. Gas it up, sure it might not leak, but if you push on it, it'll probably will. lmk... pm me if u still have questions. I don't always go back looking on here...