Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-30-2012, 10:53 AM #1
Ghostwarlock12
 
 
Ghostwarlock12's Avatar
 
Join Date: Oct 2009
HELP!!! have a leak and I cant figure it out!

So here is the thing. I have a Ion (no xe) and I recently changed 1 of the bango fittings to a QEV. now when I cant close the marker completely because it will start to leak out air but when I let it go or move it in a certain way it will stop. I checked to see if the hoses are being pinched but everything is fine. When I try to listen from where the leak is coming from I hear it coming from where the bolt is. Im not to sure if I have to change the O-rings but from I see they all look okay. SOMEONE HELP ME OUT!!!!
Ghostwarlock12 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-30-2012, 10:59 AM #2
Punisher068
 
 
Punisher068's Avatar
 
Join Date: Apr 2012
Location: Santa Cruz Mountains
check the oring at the base of your QEV 1st,I put a little lube there,also your velocity and dwell will need to be adjusted after installing the QEV.If it still leaks relube and check or replace the bolt stop orings and the breech oring that the bolt rides on,these are common spots for ions to leak
__________________
ballin' since '95
Marauders Paintball
Ion w\Axe Relay
http://www.mcarterbrown.com/forums/c...-progress.html
Punisher068 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump