Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-29-2012, 08:45 PM #1
dtpbmasta
F.A.T.E
 
dtpbmasta's Avatar
 
Join Date: Jul 2009
Location: VA
dtpbmasta supports Pev's Paintball
dtpbmasta plays in the APPA beginner division
dtpbmasta supports Empire
VF tactical with Eframe HELP!!!!!

ok guys i have a Wgp Vf Tactical, with a eframe 2 on it here is my issue i can get it to air up no leaks, shoots first shot pretty hot then after words will not recock it just puffs and the back block barely moves,

has a brand new battery went to 4 packs to make sure. turns on and the noid clicks just fine, setting are factory, unknown on velocity as it shoots only one time and its pretty hard and loud.
__________________
PSALMS 144:1

Tippmann TIPX, Lapco Front Block, MRT BK Bolt, Remote Adapter, Hammerhead 8.15" Rifled Barrel, 3 Zeta Mags, 4 Stock Mags.
dtpbmasta is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-29-2012, 08:54 PM #2
cmdrsuds
 
 
cmdrsuds's Avatar
 
Join Date: Apr 2011
Location: Colorado
Sounds like the LPR is not high enough to re cock the gun. Make sure your IVG (large screw in the lower tube found in the rear of the gun) is screwed 1-2 turns in from flush when all the way out.

Set the board back to Factory Fast too then update us.
__________________
MOWING FACES WITH A KARNIVOR PRO

-
DENVER KAOS
cmdrsuds is offline   Reply With Quote
Old 07-29-2012, 08:57 PM #3
cww516
clever text goes here
 
cww516's Avatar
 
Join Date: Mar 2005
cww516 is reppin' sidebar 4 life
Sounds like it's getting starved for air somehow, make sure your reg is clean on the inside (might need a little grease or a rebuild), and try screwing the on/off knob on your ASA in or out a little (or do the same with the tank, if you don't have an on/off style ASA).

Edit: definitely check the LPR first.
cww516 is online now   Reply With Quote
Old 07-29-2012, 09:49 PM #4
Dk-79
SCHWING!
 
Dk-79's Avatar
 
Join Date: May 2004
Location: North County, California
 has been a member for 10 years
After you check your LPR, make sure you didn't pinch any wires between the body and frame of your eblade. It'll cause the front solenoid to malfunction.

But check the LPR first.
Dk-79 is offline   Reply With Quote
Old 07-29-2012, 10:58 PM #5
dtpbmasta
F.A.T.E
 
dtpbmasta's Avatar
 
Join Date: Jul 2009
Location: VA
dtpbmasta supports Pev's Paintball
dtpbmasta plays in the APPA beginner division
dtpbmasta supports Empire
tried what was said here is a video of issue at hand.

http://s595.photobucket.com/albums/t...t=c92c9ef8.mp4
__________________
PSALMS 144:1

Tippmann TIPX, Lapco Front Block, MRT BK Bolt, Remote Adapter, Hammerhead 8.15" Rifled Barrel, 3 Zeta Mags, 4 Stock Mags.
dtpbmasta is offline   Reply With Quote
Old 07-29-2012, 11:03 PM #6
Dk-79
SCHWING!
 
Dk-79's Avatar
 
Join Date: May 2004
Location: North County, California
 has been a member for 10 years
You may have a piece of shell wedged between your bolt and feedneck.

Can you manually pull back the back block when the marker's not aired up?
Dk-79 is offline   Reply With Quote
Old 07-29-2012, 11:06 PM #7
dtpbmasta
F.A.T.E
 
dtpbmasta's Avatar
 
Join Date: Jul 2009
Location: VA
dtpbmasta supports Pev's Paintball
dtpbmasta plays in the APPA beginner division
dtpbmasta supports Empire
yep and bolt moves freely and fine, nothing is in the breech or feedneck.
__________________
PSALMS 144:1

Tippmann TIPX, Lapco Front Block, MRT BK Bolt, Remote Adapter, Hammerhead 8.15" Rifled Barrel, 3 Zeta Mags, 4 Stock Mags.
dtpbmasta is offline   Reply With Quote
Old 07-29-2012, 11:11 PM #8
Dk-79
SCHWING!
 
Dk-79's Avatar
 
Join Date: May 2004
Location: North County, California
 has been a member for 10 years
Either your LPR is low, or your noid wires are/were pinched between the trigger frame and body. Look it over for damage. Be careful putting it back together.

Assuming you're also using a new battery.
Dk-79 is offline   Reply With Quote
Old 07-29-2012, 11:14 PM #9
dtpbmasta
F.A.T.E
 
dtpbmasta's Avatar
 
Join Date: Jul 2009
Location: VA
dtpbmasta supports Pev's Paintball
dtpbmasta plays in the APPA beginner division
dtpbmasta supports Empire
i will post tomorrow what i find and yes brand new battery is installed
__________________
PSALMS 144:1

Tippmann TIPX, Lapco Front Block, MRT BK Bolt, Remote Adapter, Hammerhead 8.15" Rifled Barrel, 3 Zeta Mags, 4 Stock Mags.
dtpbmasta is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump