My extcy is leaking out of the barrel. I changed a couple of the Orings on the bolt and it still leaking, I pulled the bolt and noticed a gash in the outer ring of the "bolt guide" thingy. And the ring I just installed had a small tear in it. I changed the ring again and it fixed the big leak but still has a small leak out the barrel.
I felt inside the marker and I don't feel any burs or sharp edges that should be cutting into the guide or the ring,
f it leaks down the center of the bolt its the 14/70 or the 18/70 on the bolts stop.
If its leaks on the outside of the bolt then its the 17/70 on the inside of the breach.
Put your finger down the breach and plug the bolt tip up with the tip of your finger. If it builds up pressure then your leak is because of a bolt stop orings and if doesn't then its because of the inside breach oring.
I believe oringmonkey.com has a free .pdf download on their site... You can just print it out and lay the o-ring on top of whichever picture on the chart it fits on and that will tell you the correct size. I unfortunately don't know the actual numerical size of that particular o-ring.
Jay AKA Rogue...
Reservoir Dogs Scenario Paintball Team - Our $%^* is RIGOROUS!
Proudly and Generously Sponsored By
GOG/DLX - Valken - QuickShot Paintball - FogDoc.com - TechT - Deadlywind