[Team Misfit]

My ion when aired up is making weird noise it's like .... Put put put put with little gasp of air.. Then it will shoot one then do it again .. What's the l
Problem? I'm also on getting 200 presure in the reg gauge ..

[Punisher068]

Thats very high pressure and may kill your noid,get it under 150 and try again,assuming you dont have a QEV and arent using a Lucky/mac noid

[Team Misfit]

Originally Posted by Punisher068

Thats very high pressure and may kill your noid,get it under 150 and try again,assuming you dont have a QEV and arent using a Lucky/mac noid

I have no air right now I'll have to try that how exactly do I go about doing this?

[theblindchicken]

I've noticed on my epiphany, that the stock regulator increases/decreases about 10psi per half turn. I'll check again in the morning to be sure that this is correct.

[Punisher068]

Originally Posted by Team Misfit

I have no air right now I'll have to try that how exactly do I go about doing this?

Assume you have a stock reg w/no QEV and stock bolt
things to start with
1 check/replace your battery and check conection to board
2 check your dwell setting,it should be around 40-50 blinks
3 zero out reg by adjusting all the way counterclockwise then up about 2 turns clockwise(approx),keep pressure around 150psi,dry fire a few shots between adjusting to reset pressure shown on gauge between adjustments
4 crono
Heres a good link for all things Ion,this will help you out for any question and upgrading,good luck
http://www.zdspb.com/tech/mguide/ion/index.html