Originally Posted by Team Misfit
I have no air right now I'll have to try that how exactly do I go about doing this?
Assume you have a stock reg w/no QEV and stock bolt
things to start with
1 check/replace your battery and check conection to board
2 check your dwell setting,it should be around 40-50 blinks
3 zero out reg by adjusting all the way counterclockwise then up about 2 turns clockwise(approx),keep pressure around 150psi,dry fire a few shots between adjusting to reset pressure shown on gauge between adjustments
Heres a good link for all things Ion,this will help you out for any question and upgrading,good luck