Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-20-2012, 03:07 AM #1
fly417
 
 
fly417's Avatar
 
Join Date: Jul 2012
Pressure drop, leak near bolt.

so i just bought an Ion and At first I was having problems with after the first shot the pressure would drop off significantly and wouldn't shoot again. I'm not sure what I did (asa not all the way open ? tank all the way on ? ) but for now its staying pretty steady on the pressure gauge after each shot, But I have a hissing leak coming from the feed neck/ bolt area. Is this most likley an O-ring problem that i need to replace or something more significant ? I am running on compressed air, any help would be appriciated.
fly417 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-20-2012, 04:27 AM #2
theblindchicken
49'er
 
theblindchicken's Avatar
 
Join Date: Jun 2011
Location: Long Beach, CA
theblindchicken is an NCPA player
theblindchicken is an NCPA National Champion
theblindchicken plays in the APPA D5 division
Check the orings on your bolt and inside the breech. If any are damaged, then you'll need to replace them. Also make sure to lube up your bolt with a grease based lubricant. Your regulator may need to be cleaned if you're having issues with consistent pressures. But your issue may have temporarily solved itself.
theblindchicken is offline   Reply With Quote
Old 07-20-2012, 03:32 PM #3
WELLZ
The hero Gotham deserves.
 
WELLZ's Avatar
 
Join Date: Jul 2012
Location: North Mississippi
WELLZ has achieved Level 2 in PbNation Pursuit
I had the same problem. I replaced the O-Rings inside the breach as well as the bolt and everything was fine.
WELLZ is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump