Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-17-2012, 09:57 PM #1
Intern1
 
 
Intern1's Avatar
 
Join Date: May 2012
Location: Gallifrey
Annual Supporting Member
Intern1 has achieved Level 4 in PbNation Pursuit
Intern1 supports Empire
I am completely lost

So I replaced the or-ing on my valve and I put my gun back together, but now i can't get the gun to cock. Its like its not cathing on the sear or whatever its called. I tried screwing it in a ton and nothing. Then I tried backing it out and still nothing. Does anyone have any advice before I take it to the shop?
Intern1 is offline   Reply With Quote
Old 07-17-2012, 10:05 PM #2
PeaTear_Griffin
GUNDAMNIT
 
PeaTear_Griffin's Avatar
 
Join Date: Dec 2004
Location: IL, Carbondale
Annual Supporting Member
PeaTear_Griffin is playing at Living Legends V
PeaTear_Griffin is playing at Living Legends VI
PeaTear_Griffin supports Team VICIOUS
PeaTear_Griffin supports Pev's Paintball
Is your lpr turned up high enough to cock the gun? Are you sure your allen key is getting into the slot on the lug?

Is your cocking rod screwed in all the way or is it out of adjustment?
__________________
GI Milsim "We are *****es for your Riches."

Last edited by PeaTear_Griffin : 07-17-2012 at 10:20 PM.
PeaTear_Griffin is offline   Reply With Quote
Old 07-17-2012, 10:36 PM #3
Dk-79
SCHWING!
 
Dk-79's Avatar
 
Join Date: May 2004
Location: North County, California
Pull the trigger frame off the bottom of the body and look up at the little groove where the hammer lug sits.

It should sit relatively close to the bottom of the body. and you can fine tune it once it's catching the sear.
Dk-79 is offline   Reply With Quote
Old 07-18-2012, 12:40 AM #4
Hogzilla88
Oh You Fancy Huh?
 
Hogzilla88's Avatar
 
Join Date: Mar 2011
Location: DFW, Tx
Remove the bolt, and cock the gun. Then stick your 1/8 allen wrench through the hole in the top of the body, and stick it into the head of the lug. You may have to pull the cocking rod a little to get it lined up right. Then lower it until it will reliably catch on the sear.
Hogzilla88 is offline   Reply With Quote
Old 07-18-2012, 07:28 AM #5
Intern1
 
 
Intern1's Avatar
 
Join Date: May 2012
Location: Gallifrey
Annual Supporting Member
Intern1 has achieved Level 4 in PbNation Pursuit
Intern1 supports Empire
I haven't hooked it up to any air yet so I don't know about the lpr being too high. I guess I just have to mess with it some more.
Intern1 is offline   Reply With Quote
Old 07-18-2012, 09:59 AM #6
Intern1
 
 
Intern1's Avatar
 
Join Date: May 2012
Location: Gallifrey
Annual Supporting Member
Intern1 has achieved Level 4 in PbNation Pursuit
Intern1 supports Empire
Thanks a lot everyone! Tightening the lug even more fixed the problem. i guess I loosened it more than I thought when I took it apart.
Intern1 is offline   Reply With Quote
Old 07-20-2012, 09:30 AM #7
Digital-Paintball-3
http://paintballgame.com
 
Digital-Paintball-3's Avatar
 
Join Date: Jul 2012
You should visit a reseller, or just go with it on the field were other players are. There always people who know the tiny insides
__________________
Free 2 Play - New 3D Paintball Game Online
Digital Paintball 3.0 - http://paintballgame.com
Digital-Paintball-3 is offline   Reply With Quote
Old 07-20-2012, 03:46 PM #8
Intern1
 
 
Intern1's Avatar
 
Join Date: May 2012
Location: Gallifrey
Annual Supporting Member
Intern1 has achieved Level 4 in PbNation Pursuit
Intern1 supports Empire
My field is only open on weekends and the cloest shop is a half hour away, so that a 1 hour round trip and they don't tech cockers at my shop. Not to mention no one is smarter than the nation!
Intern1 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump