[iHeartzYou]

Got my g6r like half a month ago and just tested it this week. So when i shoot my g6r slowly it shoots fine but when i walk the trigger itll start spazzing out and continue to shoot even when im not pulling the trigger 0_o and itll go crazy untill i pull the trigger once more to make it stop. Any ideas on how to fix this? I took the trigger out and its clean and i adjusted it a bit and its still doing it.

[gamer565]

Make sure debounce is at stock setting, and that the trigger doesn't activate the switch till at least 3/4 way through the pull, and put the spring back in.

[specopsdeath2]

Originally Posted by gamer565

Make sure debounce is at stock setting, and that the trigger doesn't activate the switch till at least 3/4 way through the pull, and put the spring back in.

+1

[lopez17]

Raise your Debounce as needed. It sounds like your marker is a bouncing machine.

[Kaotix]

Personally I HATE the design of g6r triggers for this reason. They suck for adjusting comparing it to other guns.

Upping your debounce settings HIGH
and possibly having to use the spring will be your best bet

Using a trigger like a Critical or an Acid Custom which features a magnetic repel may work better for you. You'll have to try it out.