[1god1king]

Ok got all the parts in I saw a B5 bullpup mag feed and wanted to make one i ordered all the parts then read the post and saw they used a milsig k series well i am not shelling out for one and will make due with what i have .

Just curious has anyone tried this ? I will post pics as i continue trying to figure out how to cut away the least amount of the shell as possible.

the mag adapter actually fits with me only cutting a small portion of the shell but until i start wont know if it will interfere in the hand grip


any tips would be appreciated thanks
update

[Wicked x Josh]

I want to say I saw someone has already finished this. Might want to look around the different forums to find it. Cant remember exactly where I saw it.

It looks good when done properly.

[1god1king]

yea i have search and the one i found was done with a milsig not the Tacamo Magazine Fed Conversion Kit if you find it let me know

update today i made the cuts I try to make as few cuts as possible as these kits are hard to come across if i ever want to put shell back to original i would just need to glue pieces back sand and i am good .

cuts were made with a hack saw blade and one with dremel just to create space for the blade

as i assumed it is gonna be a tight fit on the grip but i have a solution for it once i get kit fitted going to need some fine tuning to get it to sit properly

[1god1king]

update Had to cut a little more off argh thought i had it right
anyways thinking of cutting where i have the white on the grip to give more room for hand .

[1god1king]

I know this is not new and i am sure someone has done this ideals please

ok i need some help does any one have a suggestion of a good setup i could use to connect a small air tank I need to know
what regulator would be best

i plan on fabricating out of wood then covering with fiber glass covering tom stone and running connection through cover to a connection to air tank thanks for your help

see photo

[1god1king]

I was just thinking i am not good at fabricating so if any one knows some one who wants to make a quick buck or two that would be great

i figured i can use Styrofoam to make a template to exact and possibly some one with skills working with fiber glass can wrap it sand to shape leave hollow and cut it in 2 pant black that way i can permanently attach and be able to open and close shell

like i said willing to pay for work let me know if you guys know any one thanks

[1god1king]

ok here are some photos of a dry fit just wanted to see how it would look all together i find that since i had to completely cut one half of the shell in half the front is flimsy. what i am going to do is take a long screw that runs through the shell of the a5 about a 1/4 longer and on the other side cap it with a cap bolt i have some more sanding to do also found some foam i can make a mold out of figure i will just soak it in epoxy the mold it to shell cut in half and used it to support the small air tank

[1god1king]

ok addressed the issue of having to cut one half of the b5 shell in 2 separate pieces
i figure once barrel is installed it will give the front half od the shell that had to separated from the rear some stability which it will but for added support i created out of the bottom half of the b5 kit a connection piece this will serve to reconnect the 2 half's and allow me to to run the wire from the trigger switch

[lilfry111]

thats a pretty sick setup
ive got a buddy whose gonna ask me
to build him one when he sees this

[1god1king]

@lilfry111 Thanks got a long way to go though here are some shots of it with the flateline barrel as i thought it makes the half in front more secure but still decided to bridge it with the piece i fabricated out of the bottom of the b5 kit

[1god1king]

once i find a piece of plastic i am going to fabricate a cover piece being the white template box it in front near clip and bottom " hollow so air line will be covered and i have a place to attach Lapco Universal Dropforward below going to make the cover in 2 halfs so you can still open gun for maintenance with ease

[1god1king]

update added braces and i am going to make my panels out of a old xbox 360 cover i had laying around I hate cutting plastic any one have any tips ?

[AoSpades]

dremel then sand it down to fit.

[1god1king]

update

[anthony2714]

So cool

[Bergy's]

look pretty good !!!! good job

[1shotHeadshot (Banned)]

Always an amazing job man!

[razer215]

you made this purely from a5? gj dude, is it fully functional? I want one

[1god1king]

Originally Posted by razer215

you made this purely from a5? gj dude, is it fully functional? I want one

yea A5 and b5 bullpup kit , yes fully functional once I replace the the stock sear with the ape board sear need to finish this .. once i am done full test and make video and it will be up for sale but not cheap , keep you posted

[SKO_GONZO]

Id just recommend filling the gaps in like maybe a ring as a guide for the magazines.

[Jj517_houstonlegends]

Looks good