Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-08-2010, 04:35 PM #64
jperezav2009
 
 
Join Date: Sep 2010
Leaking alot of air

I also have a rex type R and it is leaking from the handle.the inside i think its the solenoid im not sure.im new to this here are sum pics and theres a hole its leaking from in the pics u can see. the silver things has a small hole in the bottom and thats were its leaking from.

jperezav2009 is offline   Reply With Quote
Old 01-16-2011, 06:19 AM #65
DARMAN
 
 
Join Date: Aug 2009
DARMAN is for the Gunfight
Hello; I had the same problem, and it was the Solenoid. You will have to take-off the grip frame; then you will see on the top 2 HEX screws , that you have to loosen order to take the Solenoid OUT(they might be pretty tight).
Than you have to take out from the back of the Solenoid the Pin valve, inside you will find 2 small Orings that you have to replace and thatīs all.
The Orings Iīve found them in a Shockers repair kit that I have; but also if you donīt have one and you need a quick repair of your gun , Iīve found that you get it from a lighter .



I hope I could help you.

PS: sorry about my English writing but I live in Argentina.
DARMAN is offline   Reply With Quote
Old 04-12-2011, 04:42 PM #66
mxsi64
 
 
Join Date: Apr 2011
Barrel that fits

Hello all, I am kind of new with PB but I bought a REX typer R and wish to know what kind of barrels are compatible, because I want to upgrade to smething like 22"
mxsi64 is offline   Reply With Quote
Old 05-12-2011, 11:34 PM #67
Dusk2Dust
 
 
Join Date: Mar 2008
Its autococker threaded so just simply look for cocker threaded barrels and you might want to avoid a barrel that long it will only make you use more air. But is nice to see im not the only one who has been eyeballing one of these guns
Dusk2Dust is offline   Reply With Quote
Old 05-12-2011, 11:35 PM #68
Dusk2Dust
 
 
Join Date: Mar 2008
Does the gun have dual detents and has anyone had any problems with the bounce beam eyes
Dusk2Dust is offline   Reply With Quote
Old 05-22-2011, 03:48 PM #69
alien319
 
 
alien319's Avatar
 
Join Date: Apr 2010
Location: NC/Lancaster, PA
I have a Rex Type R, well it is/was leaking air. I believe I may have fixed it but do not have any more air until I get the tank filled. I do have another problem though, the air fitting on the back of the marker... on the ram cap broke off. The threads just sheared off. Does anyone know where I can get a new one or where I can get one that fits this? I think its metric. Any help is appreciated.
__________________
Decision....Consequence- Col. Heckl
alien319 is offline   Reply With Quote
Old 10-07-2011, 10:37 AM #70
DARMAN
 
 
Join Date: Aug 2009
DARMAN is for the Gunfight
Quote:
Originally Posted by Dusk2Dust View Post
Does the gun have dual detents and has anyone had any problems with the bounce beam eyes
The gun has only 1 detent, the bounce beam eyes are not the best but they work for the price

Quote:
Originally Posted by alien319 View Post
I have a Rex Type R, well it is/was leaking air. I believe I may have fixed it but do not have any more air until I get the tank filled. I do have another problem though, the air fitting on the back of the marker... on the ram cap broke off. The threads just sheared off. Does anyone know where I can get a new one or where I can get one that fits this? I think its metric. Any help is appreciated.
Did you tried with some teflon tape ? If that didn`t work try putting an insert.
DARMAN is offline   Reply With Quote
Old 12-01-2011, 11:44 PM #71
BackInTheGame10
 
 
Join Date: Jul 2010
Location: Wichita falls, tx
Does anyone know it this board will work in the type r if I also buy the membrane pad with it?

http://www.scenariodreams.com/oscomm...ex.php?cPath=9
BackInTheGame10 is offline   Reply With Quote
Old 04-03-2012, 07:25 AM #72
pbking316
Evil Wins
 
pbking316's Avatar
 
Join Date: Jan 2004
Location: West Pittston, PA
 has been a member for 10 years
I've been trying to fix a few broken rex type r paintball guns. My problem is also the solenoid o-rings. I could not find them anywhere locally. I even tried the o-rings out of cheap lighters but they were a tad too big.

The proper size solenoid o-ring is 1mm cross section x 2mm inside diameter I just ordered a 50 pack.

Last edited by pbking316 : 04-10-2012 at 07:11 AM.
pbking316 is offline   Reply With Quote
Old 06-06-2012, 05:10 PM #73
paintballersetc
QUALITY REAPAIR SERVICE
 
paintballersetc's Avatar
 
Join Date: Sep 2003
Location: 909 Chino Hills
 has been a member for 10 years
paintballersetc supports DLX Technology
Hey guys Im setting up a type R for play this weekend and cannot find a manual for the board for the life of me. I need to turn the eye on and would like to know how to adjust the other settings but i am not familiar with the Type R boards. Please help thanks.
__________________
SO CAL TECH!
paintballersetc is online now   Reply With Quote
Old 07-12-2012, 04:59 PM #74
Diveg
 
 
Diveg's Avatar
 
Join Date: Mar 2011
Location: New Zealand
Seconded on that - can't find a manual for the board - can someone please scan it and put the pdf on here ?
__________________
Team A.D.H.D New Zealand - Captain

INSIGHT OWNERS GROUP

Asylum Paintball - best field in NZ - technical director
Diveg is offline   Reply With Quote
Old 08-18-2012, 08:47 PM #75
SB50
 
 
Join Date: Jul 2006
I have the manual, and can scan it later if needed, but it's not with me at the moment. But I think it's the same as this one I found on this site.
SB50 is offline   Reply With Quote
Old 09-29-2012, 09:41 PM #76
you crazy ex wife
 
 
you crazy ex wife's Avatar
 
Join Date: Dec 2011
Location: United States
you crazy ex wife plays in the APPA beginner division
I need to know what type of tubing runs under the barrel and into the handle because there is a leak and I cant find any information on it. Please give me any information you have on what it is and where I can find it.
you crazy ex wife is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump